GE ZET1038 Installation Instructions Manual

Also see for Monogram ZET1038: Owner's manual Owner's manual Installation instructions Owner's manual Installation instructions

Contents

GE ZET1038 Installation Instructions Manual Manual pdf 13 page image

13Installation InstructionsSTEP 8 CONNECT ELECTRICALWARNINGELECTRICAL SHOCK HAZARD• Electrical ground is required onthis appliance.• DO NOT connect to the electricalsupply until appliance is perma-nently grounded.• Disconnect power to the junction box beforemaking the electrical connection.• This appliance must be connected to a grounded,metallic, permanent wiring system or a groundingconnector should be connected to the groundingterminal or wire lead on the appliance.Failure to do so could result in fire, personal injury orelectrical shock.AVERTISSEMENTRISQUE DE CHOCÉLECTRIQUE• Cet appareil doit être mis à laterre.• NE PAS brancher l’alimentationélectrique si l’appareil n’est pasmis à la terre de façon permanente.• Débrancher l’alimentation au boîtier deraccordement avant de faire le branchementélectrique.• Cet appareil doit être branché sur un circuit perma-nent métallique à la terre ou un connecteur de miseà la terre doit être branché à la borne de mise à laterre ou un fil de l’appareil.Il faut suivre ces instructions pour éviter desincendies, des blessures graves ou la mort.3-Conductor Branch CircuitBranch Circuit OvenRedGreenWhiteBlackBlackRedWhite orGray120V AC120V ACNeutral4-Conductor Branch CircuitBranch Circuit OvenRedBlackGreenBlackRedBare orGreen120V AC120V ACGNDWhiteWhite orGrayNeutralWhen connecting to a 3-conductor branchcircuit:• Connect oven red lead to branch circuit red lead.• Connect oven black lead to branch circuit blacklead.• Connect oven bare copper conductor and white leadto branch circuit neutral lead (white or gray).When connecting to a 4-conductor branchcircuit:• Connect oven red lead to branch circuit red lead.• Connect oven black lead to branch circuit blacklead.• Break connection between oven white lead andoven bare copper conductor.• Connect oven white lead to branch circuit neutrallead (white or gray).• Connect oven bare copper conductor to branchcircuit ground lead (green or bare copper).Note: Use copper wire only.

/ 16

Related manuals for GE Monogram ZET1038