|
5CabinetryInstallation Over a Monogram Warming DrawerSingle OvenNOTE: Additional clearances between cutouts maybe required. Check to be sure the oven supports abovethe Warming drawer location does not obstruct therequired interior 23-1/2" depth and 9-1/4" height.• These Monogram Ovens require 3/4" overlap on bothsides. Allow 1" Min. for top overlap and clearance toupper doors.Double Oven• The Monogram Warming Drawers require 5/8"overlap on all sides.• When installing a Monogram Warming Drawer belowa single or double oven, a separate 120V, 60 Hz,properly grounded receptacle must be installed.Refer to installation instructions packed with thewarming drawer for specific installation require-ments.1" Min. Above Toekick or Adjustto Oven Installation Height2" Min.Allow 5/8"Overlap onAll Sides23-1/2" Min.Inside9-1/4"28-1/2"2x2 or 2x4Anti-Tip BlockAgainst RearWall, 9" FromFloor toBottom ofBlock9"23"Max.28-1/22" Min.47-5/8" Min.47-3/4" Max.Allow 5/8"Overlap onAll Sides23-1/2" Min.Inside1" Min. Above Toekick2x2 or 2x4Anti-Tip BlockAgainst RearWall, 9" FromFloor toBottom ofBlock9"9-1/4"Frameless CabinetsWhenever possible, order 30" frameless cabinet withthe cutout sided to fit the oven. If using stock cabinets,additional finished filler pieces may be required tocover the opening.• A stock frameless cabinet cutout width may be up to28-3/4". If necessary, add 1/2" cleats to the sides,flush with the front edge of the side panels to acceptmounting screws.30"Install 1/2"Cleats toHold OvenMountingScrews. Double47-3/4" Max.Single23" Max.Cabinet Depth23-1/2" Min.From InsideBack to Frontof Cabinet Frameor Side Panel.3/4" Min.Thick BottomShelf Cut BackFlush with Frontof Side Panel.28" Min.28-3/8" Max.Note: Install theoven only withspecific modelslisted on the labellocated on top ofthe oven.
PreviousNext |