GE iBox Installation And Maintenance Manual

Contents

GE Grid Solutions iBox/iBox KitInstallation and Maintenance GuideGE Information 994-0047-5.10-4 41Downloading your iBox ConfigurationProcedure:Downloadingyour iBoxConfigurationStep Action1 If you have not already done so, connect your PC to the iBoxWESMAINT port and open SGConfig.2 In the SGConfig Project window, click the iBox device icon.3 Click Communications group > Connect > TeraTerm command.Result: The TeraTerm window appears within an SGConfig tab.4 Press ENTER.Result: SGConfig prompts you to enter a user name.5 Type westronic and press ENTER.Result: SGConfig prompts you to enter a password.6 Type your password (the default is rd) and press ENTER.Result: The following screen appears:7 Enter “2”.Result: The following screen appears:8 Enter “3”.Result: The 68K Monitor command prompt appears.9 In the command line, type el /r then press ENTER.Result: The iBox clears its error log.Tip: To speed up the configuration download, temporarily change thebaud rate of the WESMAINT serial port from the default 9600 baud to38400 baud in WESMAINT and SGConfig.To change the baud rate:• In WESMAINT, enter baud 38400 at the 68K command line.• In the SGConfig Terminal Emulator window, on theCommunications menu, click Options. On the Port Settings tab, setthe Baud Rate to 38400 and click OK.Continued on next page