GEA HG34P Series Assembly Instructions Manual

Also see for HG34P Series: Maintenance manual Assembly instructions

Contents

GEA HG34P Series Assembly Instructions Manual Manual pdf 21 page image

DGBFE2109618-05.2012-DGbFEI7.6 DecommissioningClose the shut-off valves on the compressor. Drain the refrigerant (it must not be discharged into theenvironment) and dispose of it according to the regulations. When the compressor is depressurised,undo the fastening screws of the shut-off valves. Remove the compressor using an appropriate hoist.Dispose of the oil inside in accordance with the applicable national regulations.7| Maintenance7.5 Extract from the lubricants tableThe oil type filled as standard in the factory is marked on the name plate . This oil type should beused as a preference. Alternatives are stated in the extract from our lubricants table below.Refrigerants Bock standard oil types Recommended alternativesHFC(e.g. R134a, R407C,R404A)Fuchs Reniso Triton SE 55Fuchs SEZ 32ICI Emkarate RL 46 SMobil Arctic AL 46Shell Clavus R 46HCFC (e.g. R22) Fuchs Reniso SP 46Mobil SHC 425Shell Clavus SD 22-12Sunoil Suniso 4GSTexaco Capella WF 46Available accessories can be found on the Internet at www.bock.de.7.4 Accessories