CompuScope 85GC 73CompuScope 85GC compliance statementCategory Standards or descriptionEC Declaration ofConformity ñ EMCMeets intent of Directive 89/336/EEC for Electromagnetic Compatibility.Compliance was demonstrated to the following specifications as listed in theOfficial Journal of the European Communities:EN 61326 EMC requirements for Class A electrical equipment formeasurement, control and laboratory use. 1, 2, 3IEC61000-4-2 Electrostatic Discharge (Performance criterion B)IEC61000-4-3 RF Electromagnetic Field (Performance criterion A)IEC61000-4-4 Electrical Fast Transient/Burst Immunity(Performance criterion B)IEC61000-4-5 Power Line Surge Immunity(Performance criterion B)IEC61000-4-6 Conducted RF Immunity (Performance criterion A)IEC61000-4-11 Voltage Dips and Interruptions Immunity(Performance criterion B)EN 61000-3-2 AC Power Line Harmonic EmissionsAustralia / New ZealandDeclaration ofConformity - EMCComplies with EMC provision of Radio communications Act per the followingstandard(s):AS/NZS 2064.1/2 Industrial, Scientific and Medical Equipment: 1992 1, 2, 31. High-quality shielded cables must be used to ensure compliance to the above listed standards2. Compliance demonstrated on a single card configuration3. On the host PC used by the customer, all unused back panel slots must be covered with EMIblocking plates
