CompuScope 82GC 89CompuScope 82GC specificationsPLEASE CHECK THE GAGE WEBSITE FOR THE MOST UP-TO-DATE SPECIFICATIONS.SYSTEM REQUIREMENTCompactPCI PICMG compliant system with the required number of free 6U slots; controller or PC with 128 MBRAM, 50 MB hard disk and SVGA video.There must be at least 10 A of 5 V and 3.3 A of 3.3 V for each CS82GC cardThe CompuScope 82GC must be installed in a slot that supports bus mastering to achieve stated performance.SIZE6U CompactPCIOccupies one (1) slotPOWER (IN WATTS)Worst Case Typical Power Down+ 5 Volts 50.0 W 46.0 W 7.0 W+ 12 Volts 5.0 W 4.0 W 4.0 W+ 3.3 Volts 11.0 W 10.0 W 1.0 W- 12 Volts 3.0 W 3.0 W 3.0 WCHANNELS 1 & 2Inputs per card: 2ÜImpedance: 1 MΩ, 25 pF or 50 Ω, software selectableÜCoupling: AC or DCResolution: 8 bitsÜTypical DC Coupled Bandwidth:50 ΩΩΩΩDual Channel50 ΩΩΩΩSingle Channel1 MΩΩΩΩDual Channel1 MΩΩΩΩSingle Channel±100 mV N/A N/A 250 MHz 200 MHz±200 mV 250 MHz 150 MHz 300 MHz 200 MHz±500 mV 400 MHz 300 MHz 300 MHz 250 MHz±1 V 400 MHz 300 MHz 300 MHz 250 MHz±2 V 400 MHz 300 MHz 300 MHz 250 MHz±4 V 400 MHz 300 MHz N/A N/A±5 V N/A N/A 300 MHz 250 MHz±10 V N/A N/A 300 MHz 250 MHzLower Frequency LimitAC Coupled: 1 MΩ Input: 10 Hz50 Ω Input: 20 kHzÜInput Voltage Ranges:1 MΩ: ±100 mV, ±200 mV, ±500 mV,±1 V, ±2 V, ±5 V, ±10 V50 Ω: ±200 mV, ±500 mV,±1 V, ±2 V, ±4 V
