Gaggenau BS 484/485 Instruction Manual

Also see for BS 470: Installation instructions Use and care manual Instruction manual Instruction manual

Gaggenau BS 484/485 Instruction Manual Manual pdf 17 page image

17MistingMisting brings additional steam to the oven interior.You can add moisture to food while cooking(e.g. bread, bread rolls).Misting is only possible with these heating functions:▯ Hot air + 30% humidity▯ Hot air + 0% humidity▯ Full surface grill + circulated air▯ Full surface grillTouch the e symbol as long as you want to addsteam, up to 8 seconds. After waiting at least onesecond, you can trigger misting again by touching thee symbol.Steam removalSteam removal brings cold water to the cookingcompartment. This cools down the cookingcompartment, the steam condenses. This reduces thesteam escaping when opening the door.ã Risk of scalding!Hot water may drip from the door when opened.You can use the steam removal function only up to atemperature of 130°C with the following heatingfunctions:▯ Hot air + 100% humidity▯ Hot air + 80% humidity▯ Hot air + 60% humidity▯ Full surface grill level 1 + humidity▯ Full surface grill level 2 + humidityStarting steam removal:Touch the ¡ symbol. Steam removal lasts about20 seconds. The heating remains switched off duringsteam removal.Stopping steam removal:Open the oven door or touch the ¢ symbol.Note: The steam removal function remains availablefor a short time after opening the oven door.After every use1 Remove soiling from the cooking compartment assoon as it has cooled down. Burnt-on remains willbe much harder to remove later.2 Once it has cooled down, wipe out the cookingcompartment and dry well with a soft cloth.3 Wipe kitchen units or handles if condensation hasformed on them.4 Dry the cooking compartment with the dryingprogramme (see section entitled Dryingprogramme) or leave the appliance door open untilthe interior has dried completely.Safety shut-offFor your protection, the appliance is equipped with anautomatic safety shut-off. Any heating process isswitched off after 12 hours if the oven is not operatedin this time. A message appears in the display.Exception:The long-term timer has been programmed.Confirm the message with ™ and set the functionselector to 0, then the appliance can be operatedagain as usual.