23Inserting the core temperature probeinto the foodInsert the core temperature probe into the food beforeyou place the food in the cooking compartment.Insert the metal spike into the thickest part of the food.Make sure that the tip of the spike is roughly in themiddle. It may not be inserted in the fat or be touchingthe ovenware or bones.If there are several pieces of food, stick the coretemperature probe into the middle of the thickest piece.Fully insert the core temperature probe as far aspossible.With poultry, make sure that the tip of the coretemperature probe is not positioned in the cavity in themiddle but is located in the meat between belly andthigh.When using with bread, insert the core temperatureprobe into the coldest part of the bread only afterbaking for 10–15 minutes. The core temperature probepierces the crust, but does not sink into the dough.Continue baking the bread until the desired coretemperature is reached.Setting the core temperature1 Insert food into the oven interior with the coretemperature probe inserted. Insert the coretemperature probe in the socket in the oven interiorand close the appliance door.Do not jam the core temperature probe's cable!+ and the current core temperature appear in thedisplay.2 Set the program selection to the required heatingfunction.3 Set the oven interior temperature with the rotaryselector.4 Touch the + symbol. With the rotary selector, setthe required core temperature and confirm it with+.The set core temperature must be higher than thecurrent core temperature.5 The appliance heats with the set heating function.The current core temperature is displayed and,under it, the set core temperature.You can change the set core temperatur at any time.A signal sounds when the set core temperature in thefood has been reached. The cooking mode is endedautomatically. Confirm with ™ and turn the programselection to 0.Notes‒ The measurable range is 59 to 210° F (15 to 99°C).Outside the measurable range, "--°F" is displayedfor the current core temperature.‒ If you leave the food in the cooking compartment forsome time after cooking, the core temperature willcontinue to rise somewhat due to the residual heatin the cooking compartment.‒ If at the same time you adjust a programming withthe core temperature probe and the cooking timetimer, then the programming switches the device offthat reaches the specified value first.Changing the core temperature set:Touch the + symbol. Use the rotary selector to changethe set core temperature for the food and confirmwith +.Deleting the core temperature set:Touch the + symbol. Delete the set core temperaturewith Ž. The appliance continues heating in normalcooking mode. ) ) )