Gaggenau RB 472 Instructions For Use Manual

Also see for RB 472: Installation instructions Operating instructions Operating instrucctions Installation instruction Installation instruction

Contents

Gaggenau RB 472 Instructions For Use Manual Manual pdf 12 page image

12Holiday modeIf leaving the appliance for a long period of time, youcan switch the appliance over to the energy-savingholiday mode.When Vacation mode is switched on, the followingsettings are made:▯ The appliance works in energy saving mode▯ The illumination is switched off▯ Fast cooling or fast freezing is then ended (ifactivated)Switching onPress Holiday button ¶.VACATION is displayed in the display panel.Switching offPress Holiday button ¶.The previous settings and temperature values areonce again activated.Rest modeWhen Rest mode is switched on, the followingsettings are switched off:▯ Ice maker▯ Acoustic signal▯ Interior light▯ Messages on the display panel▯ The background illumination of the display panelis reduced▯ Buttons are lockedSwitching on1. Press the fast cooling button ´ and keep it helddown.2. Press Holiday button ¶.3. Hold the fast cooling button ´ down for3 seconds longer.The symbol VACATION flashes on the displaypanel and RESTMODE is displayed.Switching offPress Holiday button ¶.The previous settings and temperature values areonce again activated.Energy saving modeIf the energy saving function (eco function) isactivated, the appliance switches to energy savingoperation. This energy saving function is preset atthe factory in order to reduce energy consumption.The background illumination of the fascia is likewisereduced.Switching on1. Press setup button μ.2. Press the selection button ¿, until ECO MODEand the current setting (OFF) is displayed.3. Press the setting button @, in order to resetthe setting.4. Press the setup button μ, in order to storethe setting.ECO is displayed in the fascia.Switching off1. Press setup button μ.2. Press the selection button ¿, until ECO MODEand the current setting (ON) is displayed.3. Press the setting button A, in order to resetthe setting.4. Press the setup button μ, in order to storethe setting.Door rail heater(for 3-door models only)To prevent condensation, the door rail heater can beswitched on and off as required.Switching on1. Press setup button μ.2. Press the selection button ¿, until DRY DOORand the current setting (OFF) is displayed.3. Press the setting button @, in order to changethe setting.4. Press the setup button μ, in order to savethe setting.Switching off1. Press setup button μ.2. Press the selection button ¿, until DRY DOORand the current setting (ON) is displayed.3. Press the setting button A, in order to changethe setting.4. Press the setup button μ, in order to savethe setting.