21Explanation of theinstallation accessoriesRA 460 000 Side-by-Side installationThis sealing set will be required if two appliancesare to be joined in a side-by-side combination. Itcontains various parts for ensuring the secure con-nection of two appliances, including a sealing mat,which is fitted in-between the appliances. This seal-ing mat prevents condensation from forming in thegap between the appliances.In addition, it contains a decorative strip for coveringthe gap between the two appliances.RA 460 011 Additional side heating elementIf two appliances are being installed separatelynext to each other and the distance between themis less than 160 mm, then an additional side heat-ing element must be installed. This also applieswhen two appliances are connected directly, how-ever, due to the side of the door hinge chosen andthe installation requirements of the correspondingfinger protection, the normal installation acces-sories for the side-by-side installation cannot beused. The additional side heating element containsa thin heating mat that must be fitted to the right-side wall of the appliance on the left-hand side.The additional side heating element prevents con-densation on the side wall of the appliance.With distances greater than 160 mm, the additionalheating element is not required.The additional side heating element does not takeup additional space. It is already included in theniche dimensions and does not interfere with thefinger protection.The following special accessories are available forinstalling and configurating the appliance.RA 460 040 Finger protection – extra longIf the standard height has been exceeded when de-signing the cabinet doors, the extra long fingerprotection must be installed to hide the entire gapcreated between the appliance door and the neigh-bouring cabinetry. This can be individually cut tosize.RA 460 020 / 030 Connecting element for cabinetdoorsFor appliances with a width of 762 mm, as well asfor fridge-freezers with a width of 914 mm, it ispossible to form the cabinet door using two narrowcabinet doors, e.g. for design reasons.In order toconnect these two doors, a metal strip is installedon the rear.RA 461 ... Stainless steel ventilation grilleA stainless steel version of the ventilation grille atthe base of the appliance front panel may be fitted.Please note that stainless-steel grilles are availablefor all models and installation options for left-hinged or right-hinged doors.Spare parts boxes for service techniciansAll of the parts needed for installing the appliancesand their fronts are supplied with the appliances.Nevertheless, even service technicians, who installmany of these appliances may require appropriateinstallation parts. Two special spare parts boxeshave been put together for this purpose.The spare parts boxes can only be ordered via cus-tomer service.ET 479177 Spare parts box (small parts) e.g.screws, mounting brackets, etc.ET 479178 Spare parts (large parts) e.g. coverstrips, finger protection, etc.<160Additional sideheating element