Gaggenau RF 411 Use & Care Manual

Also see for RF 411: Installation instruction Installation instruction Installation instructions Installation instructions Installation instruction

Contents

Gaggenau RF 411 Use & Care Manual Manual pdf 12 page image

12Rest ModeWhen Rest Mode is switched On, the followingsettings are switched Off:▯ Ice Maker▯ Acoustic Signal▯ Interior Light▯ Messages in the Display Panel▯ The background illumination of the Display Panelis reduced▯ Buttons are locked.Switching On1. Press and hold down the SUPER Button ³.2. Press the VACATION Button ¶.3. Press the SUPER Button ³ and hold down fora further 3 seconds.The “VACATION” symbol flashes on the DisplayPanel and “RESTMODE” is displayed.Switching OffPress the VACATION Button ¶.The previous settings and temperature values areonce again activated.Energy Saving ModeIf the Energy Saving Function (Eco Function) isactivated, the appliance switches to the Energy SavingOperation. This Energy Saving Function is presetat the factory in order to reduce energy consumption.The background illumination of the Display Panel islikewise reduced.Switching On1. Press the SETUP Button μ.2. Press the Selection Button ¿, until “ECO MODE”and the current setting (OFF) is displayed.3. Press the Setting Button @, in order to resetthe setting.4. Press the SETUP Button μ, in order to storethe setting.“ECO” is displayed on the Display Panel.Switching Off1. Press the SETUP Button μ.2. Press the Selection Button ¿, until “ECO MODE”and the current setting (ON) is displayed.3. Press the Setting Button A, in order to resetthe setting.4. Press the SETUP Button μ, in order to storethe setting.Alarm FunctionDoor AlarmThe Door Alarm switches On if an appliance door isleft open for longer than three minutes. Closethe door to switch Off the Warning Signal.Temperature AlarmThe Temperature Alarm switches On if the FreezerCompartment is too warm and the frozen food is atrisk of thawing.The set temperature of the Freezer Compartmentflashes and “ALARM” is displayed on the displaypanel.When the ALARM button ± is pressed,the temperature display for the Freezer Compartmentindicates for five seconds the warmest temperaturereached in the Freezer Compartment.Then this value is deleted. The temperature display forthe Freezer Compartment indicates the set FreezerCompartment temperature without flashing.Henceforth the “warmest temperature” will beredefined and saved.The alarm display goes out as soon as the settemperature has been reached again.The alarm may switch on without any risk to the frozenfood:▯ when the appliance is switched On,▯ when large quantities of fresh food are placedin the appliance,▯ if the Freezer Compartment Door is open toolong.Switching Off the AlarmPress the ALARM button ± to switch Off the WarningSignal.