9Controls for the ice and waterdispenserSwitching the appliance onSwitch on the appliance with the On/Off button ÿ.The appliance begins to cool. Light is switched onwhen the door is open.Operating tips▯ When the appliance has been switched on, it maytake several hours until the set temperature hasbeen reached.▯ The fully automatic NoFrost system ensures thatthe freezer compartment remains free of ice.Defrosting is not required.Set the languageThe display languages can be changed accordingto the table in the chapter “Special functions”, “Setupmode”.In order to change the display language:1. Press setup button μ.2. Press the ¾ or ¿ setting button, until the setlanguage is displayed.3. Press the @ or A setting button, until the desiredlanguage is displayed.4. Press the setup button μ, in order to storethe settings. The set temperature is displayedagain in the fascia.Setting the temperature unitThe temperature can be displayed in degrees Celsius(°C) or degrees Fahrenheit (°F).1. Press setup button μ.The first menu (temperature unit) is displayed.2. Press the @ or A setting button in order to switchbetween degrees Fahrenheit (°F) and degreesCelsius (°C).3. Press the setup button μ, in order to storethe settings.The set temperature is displayed again inthe fascia.Setting the temperatureFreezer compartment(can be selected from -16 °C to -24 °C)We recommend a setting of -18 °C.1. Activate the setup mode with the selectionbutton ¾.2. Set the desired temperature with the @ (warmer)or A (cooler) setting buttons.Water request button.Ice cube request button.Crushed ice request button.Switch the quick ice function on and off.Lock button for the ice and water makercontrol panel (childproof lock).To lock and unlock, hold down the buttonfor 3 seconds.Switch permanent light function onand off.