NN3. Transporting the applianceã Warning:The appliance is very heavy.Weight (empty): 230 kgHandle it carefully, as otherwise people helpingto lift it could be hurt or the appliance could bedamaged.The appliance has a height of 212,6 cm. If it is notpossible to support the appliance in a vertical positionbecause of the structure of the building, the appliancecan be transported on its side.Note:Never put the appliance up via its side! Risk of damageto the appliance.When putting the appliance up, pay attention to theminimum height that is required at the assemblylocation according to the following table.Note:Never push means of transportation under the front ofthe appliance. Risk of damage to the appliance!!1. Transport the appliance with an aid to transportwhich is suitable (sack barrow, trolley orwheelbarrow).2. When transporting, secure the appliance frombeing tipped.4. Installation preparationUnpack installation materials and accessories.To simplify installation, the packages are identified withlabels A, B, C and D corresponding with the manualsections.5. Special installation stepsThe following symbol indicates that additional stepsneed to be taken before proceeding to the next chapter.Special installation steps are described after section D.– Water connection see “Preparing thewater connection“ and “Connectingthe appliance to the water supply”.– Door opening angle see “Setting thedoor opening angle (refrigeratorcompartment door)”.Putting the applianceup on via its backsidePutting the appliance up viaits side wallMinimum height218,5 cmNever put the appliance upviaits side!