Gaggenau RY 492 Operating Instructions Manual

Also see for RB 472: Installation instructions Operating instrucctions Instructions for use Installation instruction Installation instruction

Contents

Gaggenau RY 492 Operating Instructions Manual Manual pdf 17 page image

17Specification and performancedata sheetFor filter model: 9000 077 095Using replacement car tridge: 9000 077 104The model was tested by NSF International withreference to ANSI/NSF Standards 42 & 53and certified for a reduction in the substances citedbelow.The concentration of the indicated substances whichare dissolved in water and penetrate the system wasreduced to a value below or equal to the permittedlimit value in accordance with NSF/ANSI 42and 53 for water discharged out of the appliance.Note:Even though the tests were conducted under standardlaboratory conditions, the actual performance maydeviate from these tests.* Based on the use of Cryptosporium parvum ocysts.Application guidelines / Water supply parameters::▯ The system is to be installed and operatedaccording to the guidelines recommended bythe manufacturer.▯ The filter is to be changed every 6-9 months.▯ Rinse new filter thoroughly for 5 minutes.▯ More detailed information can be found onthe warranty card.Without appropriate disinfection before and af terconnecting it to the system, this product shouldNOT be used if the water is microbiologicallycontaminated or if the quality has not beenascertained. A system certified for cyst reductionshould be used for disinfected water which possiblycontains filterable cysts.A one-year warranty is issued for the entire system(except disposable cartridge). With referenceto disposable cartridges a warranty is issued formaterial and processing faults only. As the service lifeof disposable cartridges depends on the local waterconditions, no warranty is issued for them.More detailed information on the prices of spare partsis available from your appliance dealer or partssalesman on site.Manufactured by :Cuno Engineered Products1000 Apollo RoadEagan, MN 55121-2240 U.S.A.The system was tested and certified on model9000 077 095 by NSF International with refer-ence to ANSI/NSF Standard 53 for a reduction incysts and turbidity, as well as with referenceto ANSI/NSF Standard 42 for a reduction inthe taste and odour of chlorine.Nominal particle class: INominal service life: 739.68 gallons (2,800 litres)Substance Average ininflowInflow concen-trationWaste waterconcentrationAverage reduc-tion as %Max. permittedconcentration inwaste waterMax. wastewaterMin. reduc-tion as %NSF testCysts * 166,500 Min. 50,000/l 1 99.99 99.95 1 99.99 511077-03Turbidity 10.7 11 x 1 NTU 0.3 l 97.10 0.5 NTU 0.49 95.42 511078-03Particleclass 1particlesize > 0.5 to < 1.0 μm5,700,000 At least 10,000particles/ml30.583 99.52 > 85% 69.000 98.9 511079-03Tasteof chlorineand turbid-ity1.9 2.0 mg/l + -10%0.05 97.3 > 50% 0.06 96.84 511081-03Water pressure 30 - 120 psi(207 - 827 kPa)Water temperature * 33 °F - 100 °F(0.6 °C - 38 °C)Flow rate 0.75 gpm (2.83 l/min.)