Gaggia Baby Twin Operating Instructions Manual

Also see for Baby Twin: Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Gaggia Baby Twin Operating Instructions Manual Manual pdf 6 page image

ENGLISHDescription of parts:FIG. 011 Main switch2 Coffee dispensing button-1 strong/2 weak3 Coffee dispensing button-1 weak/2 weak4 Hot water supply button5 Steam supply light6 Dose programming/Manual dispensingbutton7 Correct temperature light8 Turbo frother steam nozzle (removeable)9 Filterholder10 1 cup filter (or coffee pod)11 2 cup filter12 Basin (removable)13 “Perfect crema” device (OPTION)14 Brewing head15 Filterholder gasket16 Shower disc holder17 Shower disc18 Tamper19 Power cable and plug20 Measuring spoon21 Delivery spout22 Tank cover23 Grid (removable)24 Cappuccino maker kit (OPTION)25 Steam/hot water knob26 Removable water tank27 Overflowing protection hole28 Anti-fingerprint cleaner for stainless steel29 Level indicator for the basinInstructions for the power supply cordA A short power-supply cord is provided toreduce risks of getting tangled up or trippingover a longer cord.B Longer extension cords are available andmay be used if care is exercised in theiruse.C If a long extension cord is used:1 the marked electrical rating of the extensioncord should be at least as great as the electri-cal rating of the appliance.2 if the appliance is of the grounded type, theextension cord should be a grounding type3 the cable does not hang from the table toavoid the risk of getting caught up in it.Preparation:1. Remove the water tank cover (22) and fillwith cold water to the MAX line indicatedon tank (26). See FIG. 2.N.B.: Near the word MAX on the tank there isthe overflowing safety hole (27) in case oftank overfilling.The water tank can also be removed, afterremoving the tank cover (22) using thehandle.Re-install tank with water and cover (22).2. Insert plug (19) into a suitable wall outlet (seepoint 1 under “Caution”).3 Push the main switch (1). The temperaturelight (7) will flash until the temperature isreached; when the temperature is reachedthe light will remain on.The lights of buttons 2 - 3 - 5 - 6 will remainon in a fixed way (stand-by mode).Starting upThis procedure fills the water boiler with freshwater.This should be done whenever the machine isswitched on.This machine, featuring a pump to brew coffee,is equipped with a self-priming system.Put an empty cup below the steam frother (8),press the hot water button (4) and turn the steamknob (25) clockwise.You will hear the noise of the enabled pumpand after a few seconds water will come downfrom steam rod (8).When the cup is filled close the steam knob (25)and press the hot water button (4) again.The Gaggia machine is now ready to beused.• 9 •