Gaggia RI9700 User Manual

Also see for Babila: Service manual

83ENGLISH 83Machine actions Causes SolutionsThe machine grinds thecoffee beans but no coffeeis brewed (see note).There is no water. Fill the water tank and prime the circuit(see the "Manual Rinse Cycle" chapter).The brew group is dirty. Clean the brew group (see the "WeeklyCleaning of the Brew Group" chapter).This might occur when the ma-chine is automatically adjustingthe dose.Brew some cups of coffee as describedin the “Gaggia Adapting System”chapter.The dispensing spout is dirty. Clean the dispensing spout.The coffee is too weak (seenote).This might occur when the ma-chine is automatically adjustingthe dose.Brew some cups of coffee as describedin the “Gaggia Adapting System”chapter.The ground coffee is too coarse. Change coffee blend or adjust grind-ing as explained in the “Adjusting theCeramic Coffee Grinder” chapter.Coffee is brewed slowly(see note).The coffee grind is too fine. Change coffee blend or adjust grind-ing as explained in the “Adjusting theCeramic Coffee Grinder” chapter.The circuits are clogged. Perform a descaling cycle.The brew group is dirty. Clean the brew group (see the “WeeklyCleaning of the Brew Group” chapter).Coffee leaks out of thedispensing spout.The dispensing spout is clogged. Clean the dispensing spout and itsholes.Note:These problems can be considered normal if the coffee blend has beenchanged or if the machine has just been installed. In this case, wait untilthe machine performs a self-adjusting operation as described in the “GaggiaAdapting System” chapter.