Gaggia RI9833/70 Operating Instructions Manual

• 35 •English• To heat the milk directly in the cup,immerse the steam wand (Pannarello,if supplied) in the milk to be heated.• Turn the selector switch counter-clockwise to set it to the “ ” position.Rotate the container and move it gentlyup and down to obtain uniform foam.• After dispensing steam for the desiredtime, turn the selector switch clockwiseand set it back to the “ ” position tostop dispensing steam.• The same procedure can be used to heatother beverages.After using the steam wand (Pannarello,if supplied), wash it as described in the“Cleaning and Maintenance” section.After using steam to preparea beverage, it is possible tobrew coffee or to dispense steamstraight after.If the selector switch is left onthe central position “ ”, themachine, in order to save energy, au-tomatically reaches the temperatureneeded to dispense coffee.CLEANING AND MAINTENANCEGeneral Cleaning• Empty and clean the coffee groundsdrawer daily, with the machine turnedon.Note: We recommend em-ptying the container if themachine is not going to be used forsome days.• Maintenance and cleaning operationscan only be carried out when the ma-chine is cold and disconnected from theelectric network.• Do not immerse the machine in water.• Do not wash any of its parts in thedishwasher.• Do not use sharp objects or harsh che-mical products (solvents) for cleaning.• Use a soft, dampened cloth to clean themachine.• Do not dry the machine and/or itscomponents using a microwave and/or standard oven.After preparing milk beve-rages, dispense hot waterfrom the steam wand (Pannarello,if supplied) to obtain a thoroughcleaning.• Every day, after heating the milk, remo-ve the external part of the Pannarello(if supplied) and wash it with freshdrinking water.• Clean the steam wand weekly. In orderto do this, perform the following ope-rations:- Remove the external part of thePannarello (for standard cleaning);- Remove the upper part of thePannarello from the steam wand;- Wash the upper part of the Pannarellowith fresh drinking water;- Wash the steam wand with a wetcloth and remove any milk residue;- Replace the upper part in the steamwand (make sure it is completelyinserted).