Gaggia TITANIUM Espresso Machine Operating Instructions Manual

Contents

Gaggia TITANIUM Espresso Machine Operating Instructions Manual Manual pdf 16 page image

ENGLISH• 34 •RINSE MACHINEOPEN KNOB10 Turn the steam knob (16) anticlockwise to empty out the contentsof the water tankMACHINE IS RINSING11 When the machine rinse cycle is completed the display will show:RINSING FINISHEDCLOSE KNOB12 Close the tap, reload the circuit and let the machine heat upIf you use a product other than the recommended one,you should follow the manufacturer’s directions on thepackage.12.1 Interrupting the descaling cycleIf the descaling cycle is interrupted by switching themachine OFF, it will automatically resume when themachine is switched back ON.The descaling cycle can be interrupted by turning the steam knob (16)clockwise and then pressing the button (27).The display will show:DESCAL. INTERRUPTEDEMPTY WATERTANKWarning! After interrupting the cycle you must emptythe water tank of the descaling solution and wash outthe tank with fresh drinking water; the machine circuit must becleansed by carrying out a rinse cycle. The display will show:RINSE MACHINEPRESS KEYFollow the directions for a normal rinse cycle provided in section8 of the previous chapter.13 FUNCTION PROGRAMMINGThe user can change some machine operatingparameters according to personal needs.13.1 MENU/OK commandIn order to program functions you must access the programming modeby pressing “MENU/OK” (28) when the machine is in a standbystatus.To select the desired function, press the “∧∧∧∧∧” button to move up oneline or the “∨∨∨∨∨” button to move down on the display.To exit the programming mode press “ESC”13.2 Choosing individual functionsSelect the desired function by pressing “∧∧∧∧∧” or “∨∨∨∨∨”. Press“MENU/OK” to enable the desired function; you can browse theselectable settings using the “∧∧∧∧∧” or “∨∨∨∨∨” button; to store a settingpress “MENU/OK”.Note: by pressing “ESC” you can exit the programmingmode at any time without saving the changes made;exiting without saving is possible only before you have pressed“MENU/OK”.13.3 Description of programmable functionsENERGY SAVINGIf the appliance is used little, it may be switched to the ENERGY SAVINGmode. This function allows electricity costs to be reduced. However, it isrecommended to switch the appliance off completely using the on/offswitch (7) if it is not to be used for a prolonged period. It will take themachine just a few minutes to heat up when you switch it back on.• In the programming mode press “∧∧∧∧∧” or “∨∨∨∨∨” to select the function:ENERGY SAVINGand enable it by pressing “MENU/OK”; the following message willappear:ENERGY SAVINGin this mode the machine remains on but no components are active.• To deactivate the “ENERGY SAVING” function, press “MENU/OK”.RINSINGImmediately after heating up, the appliance automatically eliminatesthe water left standing in the internal circuit to ensure that only freshwater will be used to make coffee.The function is activated in the factory.• To deactivate it, go to the programming mode and press “∧∧∧∧∧” or