Gaggia TITANIUM Espresso Machine Operating Instructions Manual

Contents

Gaggia TITANIUM Espresso Machine Operating Instructions Manual Manual pdf 20 page image

ENGLISH• 38 •ON/OFF TIMEOFF 9:30then press “∧∧∧∧∧” or “∨∨∨∨∨” to set the minutes and memorise the settingby pressing “MENU/OK”.Warning: if the on/off time settings coincide, themachine will ignore both. After the times have beenset, the clock must be activated in order for the function to work.Activating the automatic on/off functionNote: activating this function makes sense only if youhave already set the on/off times.• Press “∧∧∧∧∧” or “∨∨∨∨∨” to select the function:CLOCKenable it by pressing “MENU/OK”.• The display will show:CLOCKOFFIn this case pressing “MENU/OK” will deactivate the function.Choose to activate the function by pressing “∧∧∧∧∧” or “∨∨∨∨∨” and whenCLOCKONappears, memorise the setting by pressing “MENU/OK”.When you exit the programming mode, the machine will check the setparameters. If the current time falls within the set deactivation time,the display will indicate:ENERGY SAVINGNote: during the set deactivation period, the machinecan be restarted at any time by pressing “MENU/OK”.Later, to deactivate the machine again, go into theprogramming mode by pressing “MENU/OK” and exitimmediately by pressing “ESC”.RINSING CYCLEWith this function, all the parts involved in the coffee dispensingprocess undergo a washing cycle with water.During the wash cycle it is recommended that a personbe on hand to supervise the operation.• To start the wash cycle, press “∧∧∧∧∧” or “∨∨∨∨∨” to select the function:RINSING CYCLEto enable the function press “MENU/OK”. Press “MENU/OK”again to start the wash cycle.• When the wash cycle is completed, the following message willappear.FILL WATERTANKAt this point fill the water tank. The machine will automaticallyswitch to the normal operating mode and the following messagewill appear on the display:SELECT PRODUCTREADY FOR USEFACTORY SETTINGSThis function allows you to restore all the machine operating parametersoriginally set by the manufacturer.• After accessing the programming mode, press “∧∧∧∧∧” or “∨∨∨∨∨” to selectthe function:FACTORY SETTINGSthen enable it by pressing “MENU/OK”. The following indicationwill appear:FACTORY SETTINGSNO• Choose whether you want to restore the factory settings by pressing“∧∧∧∧∧” or “∨∨∨∨∨” and press “MENU/OK” to confirm your selection.Caution: when you restore all the factory settings, youwill lose any custom settings you have made on themachine.14 LEGAL INFORMATION• This instruction book contains the information you need in order touse and upkeep your appliance correctly.• The information should be viewed as a guideline for using andupkeeping your coffee maker in safety. The information is notexhaustive. For additional information or for information on topicsnot covered or inadequately covered in this instruction book, pleasecontact an authorized service centre or the manufacturer directly.