Gantner GAT NET.Lock 7000 Installation, Configuration & Operation
Also see for GAT NET.Lock 7000: Manual
                                        | |
Contents
| 
GAT NET.Lock 7000 SystemGeneral Informationwww.gantner.com HB_GAT-NETLOCK7000--EN_30 91. GAT NET.Lock 7000Electronic RFID locker lock without connection cable and without bolt set.2. GAT NET.Lock BoltSet 7100Bolt set with door shackle and booster. Used for non-metallic doors. The bolt set is mounted on the inside of thelocker door.3. GAT NET.Lock BoltSet 7200Bolt set with door shackle and booster. Used for metallic doors. The bolt set is installed into locker door. Thelabel carrier is also included in this article.4. GAT NET.Controller S 7000The slave controller is a control unit to connect up to 24 GAT NET.Lock 7000. There are two different slavecontrollers available, which differ in the type of RFID reader.5. GAT NET.Controller M 7000The master controller is a control unit to connect up to 8 slave controllers GAT NET.Controller S 7000. The mastercontroller is used to connect the slave controllers to a server / PC.6. GAT NET.Power Supply 230V EUPower supply unit for the slave and master controller (mains power plug is of type EU).7. GAT NET.Power PlugPlug to supply multiple controllers with a single power supply (see "4.3. Connections at the Slave Controller GATNET.Controller S 7000").8. GAT NET.Lock Tool 7000Center punch gauge for bolt mounting in the locker doors. With these gauges the drillings for the mounting canbe easily marked on the locker doors.9. GAT NET.Lock Label 7000 GEA xxxDifferent front labels in GANTNER design. The labels are available for right and left doors and with or withoutprinted locker numbers. On metallic doors the labels are sticked onto the label carrier. On non-metallic doors thelabels can be sticked directly onto the doors.10. GAT NET.Lock Cable 4m4-pin connection cable (4 metres) to connect a GAT NET.Lock 7000 to a slave controller. MOLEX plugs on bothsides.11. GAT NET.Lock ConnectorConnection socket to connect two GAT NET.Lock Cable 4m.12. Ethernet Patch CableStandard network cable (min. CAT5) to connect the slave controller to the master controller.13. GAT NET.Lock Basic Set xxxSet consisting of five master cards and an assumption of liability sheet. The master cards have master key func-tionality and can be used to open all lockers in an GAT NET.Lock 7000 locker system (e.g. used for service- andcleaning personnel). Available for different RFID technologies ("B" for LEGIC®, "F" for MIFARETM and "ISO" forISO 15693 systems).2.2 Ordering GuideFor the planning and ordering of the GAT NET.Lock 7000 system components, an ordering guide is available in aseparate document ("DK_GAT-NETLOCK7000--Bestellhilfe-EN"). |
Related manuals for Gantner GAT NET.Lock 7000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine