Ganz C-AllView Installer's Manual

Also see for C-AllView: Installation manual

Contents

Ganz C-AllView Installer's Manual Manual pdf 5 page image

InstallationCamera mountingThe camera is designed to be mounted upright or hang-ing. By nature of its rugged construction the camera isa heavy item and thus requires a substantial and stablemounting. The camera is supplied with a mount adaptor toallow fixing to industry standard brackets, towers or columns.The mount adaptor has two cable entry points:• A pass-through hole in the end plate to allow the com-posite cable to enter unseen from a column, tube orbracket type mounting, plus• A conduit thread (M25) in the side wall to permit com-posite cable entry via a flexible conduit attached to the adap-tor.To mount the camera1 Thread the composite cable through the appropri-ate entry hole into the mount adaptor before it isfixed to the column or bracket.2 To avoid placing strain upon the electrical connections,arrange the composite cable such that approximately25~35mm of the weatherproof connector protrudesout from the smaller plate that will connect to thecamera.3 Secure the mount adaptor tothe supporting structure us-ing M8 bolts, washers andNyloc® type nuts.IMPORTANT: Always useNyloc nuts in order to signifi-cantly reduce the possibility of boltsworking loose during operation due tovibration.