Installation Guide364.5 Corner Mount4.5.1 Corner Standard Mounting Plate/Corner Plate MiniItems Needed:• Dome Camera• Outdoor Mount Kit (supplied)• Data Cable (supplied)• Ethernet Cable (IP Dome Camera)• Standard/Compact Pendent Mount and equipped items (optionalaccessory)• Corner Standard Mounting Plate/Corner Plate Mini (herein collectivelycalled “Corner Mounting Plate”; optional accessory)• Waterproof Rubber (supplied)• M5 Standard/Security Screw (supplied)• Screws and Screw Anchors for fixing the Corner Mounting Plate (notsupplied)Tools Needed:• Tool for drilling• Tool for screwingFollow the steps below to mount the Dome Camera with the Corner MountingPlate and Standard/Compact Pendent Mount.1) Make a cable entry hole on the wall to recess the cable(s).2) Fix the Corner Mounting Plate on the corner of the wall with proper screwsand screw anchors. Then run the cable(s) through the hole on the CornerMounting Plate with the Data Cable’s 22-pin cable coming out.3) Fasten the Standard/Compact Pendent Mount onto the Corner MountingPlate with the supplied screws and washers. Then thread the cable(s)through the Standard/Compact Pendent Mount with the cable(s) comingout of the Pendent Mount’s outlet.NOTE: Please block the cable entry hole with the supplied spongeto avoid insects entering the Pendent Mount. See the illustrationsin section 4.4.1 Compact Pendent Mount > Step 4.4) Attach the Waterproof Rubber to the Standard/Compact Pendent Mount.5) Thread the cable(s) through the Outdoor Mount Kit and join the Outdoor