Ganz ZC-PT Series Installation Manual

Also see for ZC-PT series: Installation guide User manual Installation guide User manual User manual

Ganz ZC-PT Series Installation Manual Manual pdf 49 page image

Installation Guide434.5.2 Corner Thin/Wide Box MountingPackage Contents:• M8x16 Screw x4• Washer-8 x4• Spring Washer-8 x4Items Needed:• Dome Camera• Data Cable (supplied)• Standard/ Compact Pendent Mount and equipped items (optionalaccessory)• Corner Thin/Wide Box (optional accessory)• Indoor Mount Kit (optional accessory)• Waterproof Rubber (Indoor Mount Kit’s accessory)• Screws and Screw Anchors for fixing the Corner Thin/Wide Box (notsupplied)Tools Needed:• Tool for drilling• Tool for screwingFollow the steps below to mount the Dome Camera with the CornerThin/Wide Box and Standard/ Compact Pendent Mount.1) Make a cable entry hole on the wall to recess the cable(s).2) Fix the Corner Thin/Wide Box on the corner of the wall with proper screwsand screw anchors. Then run the cable(s) through the hole on the CornerMounting Plate with the Data Cable’s 22-pin cable coming out.3) Fasten the Standard/ Compact Pendent Mount onto the Corner Thin/WideBox with the supplied screws and washers. Then thread the cable(s)through the Standard/ Compact Pendent Mount with the cable(s) comingout of the Pendent Mount’s outlet.NOTE: Please block the cable entry hole with the supplied spongeto avoid insects entering the Pendent Mount. See the illustrationsin section 4.4.2 Compact Pendent Mount > Step 4.4) Attach the Waterproof Rubber to the Standard/ Compact Pendent Mount.5) Thread the cable(s) through the Indoor Mount Kit and join the IndoorMount Kit to the Standard/ Compact Pendent Mount with the suppliedscrews and washers. Then adjust the Waterproof Rubber to the joint.