Ganz ZC-PT Series Installation Manual

Also see for ZC-PT series: Installation guide User manual Installation guide User manual User manual

Ganz ZC-PT Series Installation Manual Manual pdf 53 page image

Installation Guide474.6.2 Pole Thin/Wide Box MountingPackage Contents:• M8x16 Screw x4• Washer-8 x4• Spring Washer x4,• Stainless Steel Straps x4Items Needed:• Dome Camera• Data Cable (supplied)• Standard/ Compact Pendent Mount and equipped items (optionalaccessory)• Pole Thin/Wide Box Mounting (optional accessory)• Indoor Mount Kit (optional accessory)• Waterproof Rubber (Indoor Mount Kit’s accessory)• Stainless Steel Straps for fixing the Pole Thin/Wide Box Mounting (optionalaccessory)Tools Needed:• Stainless Strap Cutter• Tool for screwingFollow the steps below to mount the Dome Camera with the Pole Thin/WideBox and Standard/ Compact Pendent Mount.1) Fasten the Pole Thin/Wide Box on a pole with equipped stainless straps.2) Run the cable(s) through the hole on the Pole Thin/Wide Box Mountingwith the Data Cable’s 22-pin cable coming out.3) Fasten the Standard/ Compact Pendent Mount onto the Pole Thin/WideBox Mounting with the supplied screws and washers. Then thread thecable(s) through the Standard/ Compact Pendent Mount with the cable(s)coming out of the Pendent Mount’s outlet.NOTE: Please block the cable entry hole with the supplied spongeto avoid insects entering the Pendent Mount. See the illustrationsin section 4.4.2 Compact Pendent Mount > Step 4.4) Attach the Waterproof Rubber to the Standard/ Compact Pendent Mount.5) Thread the cable(s) through the Indoor Mount Kit and join the IndoorMount Kit to the Standard/ Compact Pendent Mount with the suppliedscrews and washers. Then adjust the Waterproof Rubber to the joint.