Gardena AccuCut 400 Li Operating Instructions Manual

Also see for AccuCut 400 Li: Operating instructions Operating instructions

Contents

Gardena AccuCut 400 Li Operating Instructions Manual Manual pdf 4 page image

14GB3. Assembly1. Push the cover 3 into the guide of the cutting head frombehind 2 until the connection locks into place on both sides.2. Push plant guard 1 onto the cutting head from the front 2until it locks into place.20 plastic blades and a magazine for spare blades are suppliedwith your trimmer. Up to 6 spare blades can be stored in themagazine.1. Slightly widen magazine 4 at open point and slide ontohandle 5.2. Insert up to 6 plastic blades 6 in the magazine 4 until theblades jam.To fit blade into blade carrier see 8. Troubleshooting“Replacing blades”.The additional wheel is available as an optional extra for theAccuCut 400 Li. The additional wheel is already fitted on theAccuCut 450 Li.Fit additional wheel :v Fit additional wheel 7 onto theguides of the handle holder 8until you hear the connectionlock into place on both sides.Remove additional wheel :v Pull both catches 9 out to theside and remove the additionalwheel 7 from the guides of thehandle holder 8.Fold additional wheel up / down :v Press adjusting buttons zT on bothsides, fold additional wheel up / down 7and release the adjustment buttons zT again.Assembling the trimmer :Fit additional wheel :213877zT4569Only charge battery between 10 – 45 °C. Afterheavy duty service allow battery to cool downfirst.Storage :The trimmer must not be stored over 35 °C orunder direct exposure to sunlight.Do not store the trimmer in places with staticelectricity.Fit magazine forspare blades :