Gardena EHT 410 VARIO Operating Instructions Manual

Contents

13GBPossible working positionsSwivel Swivelhandle down handle upfor cutting for cuttinghigh hedges low hedgesorsidewayscuttingInitial OperationCable lock / Extension CableMake part of the extension cable into a loop and clip intothe cable lock.➔ prevents the cables being unplugged by accident.Then:Connect the mains and extension cables.The Hedge Trimmer is fitted with a two-hand safety switch toprevent the tool being turned on by accident. To start the HedgeTrimmer, simultaneously press a start button on the guide handleand turn the turning switch to either the left or right.Hold the guide handle with one hand and press one of the threestart buttons.With your other hand, hold the swivel handle and move the switchto the left or right as far as it will go and hold in this position.Preferable turning direction : towards you.➔ the Hedge Trimmer starts moving.To stop the Hedge Trimmer, simply release one of the start buttonsor the turning switch.In accordance with safety regulations, an additional safety deviceensures that the blade motion stops within 1 sec.Two-hand safety switchStarting the Hedge TrimmerStopping theHedge Trimmer