Garland CG-48F Installation And Operation Manual

Contents

Part # 4520498 (01/08)Page 10MAINTENANCE & CLEANING ContinuedDon’ts1 Do not use salt to clean the griddle surface Salt iscorrosive and can cause pitting of the griddle2 Do not allow metal utensils (Spatula, scraper, etc ) tonick and/or dent the surface of the griddle The edges ofthese utensils are sharp and will create divots that oil cancollect in and caramelize which will cause sticking Do not use the griddle as a hot top A large pan or pot willtrap heat and can cause the griddle plate to warp4 Do not overheat the griddle to preheat faster Preheatingonly takes 15 – 20 minutesSERVICINGTo ensure efficient and safe operation of the appliance itis recommended that servicing be carried out at regularintervals, the frequency of which will vary, depending on theinstallation conditions and usage Usually once per year isadequateSAFETYIt is essential that the instructions in this booklet be strictlyfollowed for the safe and economical operation of theequipment If it is known or suspected that a fault exists onthe appliance then it must not be used until a competentperson has rectified the faultServicing must be carried out by competent persons inaccordance with the law

/ 12

Related manuals for Garland CG-48F