Garland GIU 1.5 (BH/BA 1500) Service Manual

Also see for BH/BA 1500: Installation and operation manual Instructions for use

Contents

Garland GIU 1.5 (BH/BA 1500) Service Manual Manual pdf 15 page image

Part # 4521635 (03/04/08) Page 15SECTION 7 – EXCHANGE OF SPARE PARTSCAUTIONAll spare parts and or accessories, mayonly be replaced by authorized servicepersonnel.CAUTIONIn order to guarantee safety, use onlygenuine OEM spare parts and accessoriespurchased directly from a Garlandauthorized part/service distributor. If othercomponents are used, no liability will beaccepted.CAUTION The electrical supply must bedisconnected.To Open The Induction Unit(Counter Top Models)• Turn the induction unit.• Remove M4x8 screws.• Turn induction unit back in normal position.• Lift cover, turn away at the right side, put it at the sidepanel.• Remove coil carrier: remove 2 stop nuts at the left.• Remove M4 screws.• Remove screws A1 and A2.• Turn away coil carrier at the left.To Open The Induction Unit(Built In Models)• Remove M4 screws on the right side.• Lift cover with the glass.• Remove M4 screws, remove coil carrier.• Remove PT-sensor and coil connections.SECTION 8 – ADJUSTMENT OF PROCESS PARAMETERSThe induction unit (excluding all WOK-units) with newCu sensors can be adjusted. This can be done either bymeans of the short circuit service plug (Poti-LED) partnumber (94900096) or by PC/Laptop. In addition, the pandetection and the power performance, can be adjusted bythe hyperterminal program of the PC/Laptop. Please referto Section 9 “IR Interface” for instructions on how to use thehyperterminal program.Initializing CU SensorsBy The Short Circuit PlugIf only the CU sensor is exchanged, the new CU sensor can beinitialized by means of the short circuit service plug (Poti-LED). For this, you will not need the PC or Laptop. The pandetection and the performance will not have to be changed.Procedure of Initialization:• The cooking area must be clear of any items.• Surrounding temperature 25°C (+/- 3°C) or 77°F(+/- 37.4°F).• Disconnect the induction unit from the main powersupply.