Garland GIU 2.5 Instructions For Use Manual

Also see for GIU 2.5: Service manual Service manual Installation and operation manual

Contents

• Take the pan away from the heating area, the indicator light will flash• Place the pan back on the heating area, the indicator light will illuminate and the heatingprocess will continue.• Turn the control knob to the OFF-position, the heating process will stop, indicator light turns off.The shining indicator light operation means that energy is being transferred to the pan.If the indicator operation remains off, check the following:• Is the cooker connected to the outlet?• Is the control knob in ON position?• Do you use a suitable pan ? (bottom diameter at least 12cm (5"), pan made of suitable material)• Is the pan placed in the center of the heating area?To verify if the pan is suitable, use a permanent magnet and find out if it sticks to the bottom ofthe pan. If not, your pan is not suitable for induction cooking. Choose a pan which isrecommended for induction cooking.If in spite of all positive controls and tests, the cooker doesn't work, refer to theTrouble Shooting Section.This symbol identifies the safetyinformation which may cause danger(personal injury) for people atnon - observance of proper operation6 OperationModes of operationHeatingThe induction cooker is switched on with the control knob (OFF ‡ ON). The cooker isimmediately ready for operation. The illuminated indicator operation lights means that energy isbeing transferred to the pan.The power rating is set by turning the control knob. The inductive power depends on theposition of the potentiometer:• Ò position 1: minimum power• Ò position 10: maximum power for GIU 2.5• Ò position 12: maximum power for all other modelsControl knobthe number that points to the indicator operation marks the actual position of the controlknob.OFF-position:0 points to the indicator operationON-position:any position, where other than 0 points to the indicator operation