Garland MWE3W Installation And Operation Manual

Also see for MWE3S: STEPS FOR PROGRAMMING GRILL RECOVERY CLEANING Programming instructions Programming Instruction Installation and operation manual Service manual

INSTALLATION/OPERATION MANUAL GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITIONPART #4521777 (08/18/09)Page 24The platen will lower, and recognize the product thathas been loaded on the grill.5. Alarm will sound when the cook cycle is complete.6. Remove product and clean grill to prepare for the nextcook cycle.LUNCH IN AUTO MODENote: Switching from Breakfast to Lunch menu items willtake approximately 10 minutes to heat to the appropriatetemperatures.1. Select PM mode. Press and hold the button.2. Select Auto mode. Press and hold the button. Thecontrol will display “PM / AUTOMATIC.”3. Following the lay patterns shown on the followingpage, load product on the grill.OPERATING PROCEDURES (continued)4. Press the GREEN pushbutton to initiate a cook cycle.The platen will lower, and recognize the product thathas been loaded on the grill.5. Alarm will sound when the cook cycle is complete6. Remove product and clean grill to prepare for nextcook cycle.TRANSITION COOKINGApproximately 30 minutes before changing to the lunchmenu, perform the following:1. PRESS the button (to display the upper platentemperature).2. Press the button.3. The upper platen indicator will light (AMBER) andmaintain the normal operating (set) temperature.PRODUCT RECOGNITIONThis Garland Clamshell grill is equipped with Product Recognition Controls (PRC). This new technology allows the user tosimply start a cook cycle WITHOUT having to select a specific menu item. The PRC will recognize the product thicknessby utilizing switches inside the upper platen and the magnets mounted on the platen arms. Once the PRC calculatesthe thickness of the product that’s been loaded, it will look up product from the product range library (below), andautomatically select that product.MENU ITEM MIN GAP MAX GAPBreakfast Library Recommended RangesStrip Bacon .010 .130Sausage Clam .210 .405Steak Clam .430 .480MENU ITEM MIN GAP MAX GAPLunch Library Recommended Ranges10:1 Clam .160 .3454:1 Clam .365 .560Strip Bacon .001 .130While cooking in Automatic Mode, the platen will lower and rest on the top of the product. The platen arms will continueto move in a downward motion performing various calculations to measure the thickness of the product that has beenplaced. In the event “Product Not Recognized” or the wrong product is recognized, perform an Auto Forced Calibration.Performing an Auto Force Calibration will reset the platen to the grill surface.TO PERFORM AUTO FORCED CALIBRATION1. PRESS and HOLD the and buttons together. The control will display AUTO FORCE CAL - NO.2. PRESS the button. The “NO” will begin to flash.3. PRESS the button. The flashing “NO” will change to flashing “YES”.4. PRESS the button. The upper platen will immediately begin to lower and perform an auto calibration routine.