Garland Master Series Installation, Operation And Maintenance Manual

Also see for Master Series: Technical reference manual Installation, operating & service manual Brochure Installation and operation manual Installation, operation and maintenance manual

Contents

Garland Master Series Installation, Operation And Maintenance Manual Manual pdf 16 page image

MOTOR CAREThe motor on your convection oven is maintenance free sinceit is constructed with self-lubricating sealed ball bearings.It is designed to provide durable service when treated withordinary care. We have a few suggestions to follow on thecare of your motor. When the motor is operating, it coolsitself internally by air entering at the rear of the motor case,provided proper clearance has been allowed.Since the blower wheel is in the oven cavity it is at the sametemperature as the oven. If the motor is stopped while theoven is hot, the heat from the blower wheel is conducteddown the shaft and into the armature of the motor. Thisaction could shorten the life of the motor.We recommend, at the end of the bake or roasting period,when the oven will be idle for any period of time, or beforeshutting down completely, that the doors be left openslightly.On the 200 series controllers, push the rocker switch to COOLposition. Once cool set the rocker switch to OFF.NOTE: Optimal cool-down will be achieved with the dooropen slightly.Part Number 260BGS rev B 4/1516