Garland XE24 Installation And Operation Manual

Also see for XE24: Installation, operation and maintenance manual Installation, operating & service instructions

Part # 4517125 Rev. 2 (01/09/12)Page 22PROGRAMMING continuedTo Change Product Button, “Key” Assignment1. Press and hold for three, (3) seconds. “ENTER CODE” isdisplayed.2. Using the Product buttons, 0-9 enter the code, (1251).“ENTER CODE **** ” is displayed.3. Press to enter the Programming Mode.“PROGRAMMING MODE MENU ITEMS” is displayed.4. Press . “MENU ITEMS STANDBY” or menu assigned tobutton 1 is displayed.5. Use and to select any unused item from the MenuItem.6. Press six, (6) to display “ASSIGN TO KEY (1-8 or NONE)”- Make sure you have assigned desired values to time gapand temperatures”.NOTE: If time is left with zero value, the key assignment willnot go into effect.(you will hear double beep when choosingkey in cooking mode)7. Use and to change the key, (Product Button),assignment, and replace any previous assignments tothat key.8. Press to save the changes.9. Press twice to exit.To Change a Product Name:1. Press and hold for three, (3) seconds. “ENTER CODE” isdisplayed.2. Using the Product buttons, 0-9 enter the code, (1251).“ENTER CODE **** ” is displayed.3. Press to enter the Programming Mode.“PROGRAMMING MODE MENU ITEMS” is displayed.4. Press . “MENU ITEMS STANDBY” or menu assigned tobutton 1 is displayed.5. Use and to choose the desired Menu Item.6. Press seven, (7) times to display “PRODUCT NAME(CHOSEN ITEM)” – Make sure you have assigned desiredvalues to time gap and temperatures)”7. Use and to cycle through the available productnames until the desired name is achieved.8. Press to save the changes. You will automaticallyreturn to “PROGRAMMING MODE MENU ITEMS”.9. Press to exit.System Info...To View Recovery Time - Upper Platen:1. Press and hold for three, (3) seconds. “ENTER CODE” isdisplayed.2. Using the Product buttons, 0-9 enter the code, (1251).“ENTER CODE **** ” is displayed.3. Press to enter the Programming Mode.“PROGRAMMING MODE MENU ITEMS” is displayed.4. Press one, (1) time to display “PROGRAMMING MODESYSTEM INFO.”5. Press to view the upper recovery time. “RECOVERYUPPER XXXX” is displayed.6. Press to return to “PROGRAMMING MODE SYSTEMINFO”.7. Press to exit.To View Recovery Time - Grill:1. Press and hold for three, (3) seconds. “ENTER CODE” isdisplayed.2. Using the Product buttons, 0-9 enter the code, (1251).“ENTER CODE **** ” is displayed.3. Press to enter the Programming Mode.“PROGRAMMING MODE MENU ITEMS” is displayed.4. Press one, (1) time to display “PROGRAMMING MODESYSTEM INFO.”5. Press two, (2), times to view the grill recovery time.“RECOVERY GRILL XXXX” is displayed.6. Press to return to “PROGRAMMING MODE SYSTEMINFO”.7. Press to exit.To View the Garland Part Number:1. Press and hold for three, (3) seconds. “ENTER CODE” isdisplayed.2. Using the Product buttons, 0-9 enter the code, (1251).“ENTER CODE **** ” is displayed.3. Press to enter the Programming Mode.“PROGRAMMING MODE MENU ITEMS” is displayed.4. Press one, (1) time to display “PROGRAMMING MODESYSTEM INFO.”5. Press three, (3), times to view the Garland Part Numberfor the grill. “GARLAND PART # X…X” is displayed.(number varies by grill).6. Press to return to “PROGRAMMING MODE SYSTEMINFO”.7. Press to exit.