Garmin 182/182C Owner's Manual

Also see for GPSMAP 182C: Declaration of conformity Declaration of conformity Owner's manual Specifications

Contents

Garmin 182/182C Owner's Manual Manual pdf 19 page image

GPSMAP 182/182C Owner’s Manual 13BASIC OPERATION > N AVIGATING TO A DESTINATIONTo activate a Go To from a point list:1. Press the NAV key. Highlight Go To Point, and pressENTER.2. From the Find menu, highlight Waypoints, and pressENTER. (You can also choose to go to other points, such asCities or Tide Stations from this list.)3. To select a waypoint from the waypoint lists, use theROCKER to highlight either the By Name or Nearest tab,select a waypoint, and press ENTER.OrTo select a waypoint from the map, highlight either the Useror Nearest tab and press MENU. With Select From Maphighlighted, press ENTER. Use the zoom IN and OUT keysand the ROCKER to select a waypoint, then press ENTER.Selecting a Go To GraphicallyA graphical Go To can be used to select one of three items fromthe map display: an existing waypoint, on-screen map items suchas roads, rivers, cities, and navaids, or a new map point. If youare selecting a map item as the Go To destination, the GPSMAP182/182C automatically uses the name of the map item, but thepoint is not stored in the waypoint list. See page 21 for creatingwaypoints using map items. If you are selecting a new map point(non-map item) as the Go To destination, the GPSMAP 182/182Cautomatically creates a waypoint at the pointer location.To activate an existing waypoint or map item as a GoTo from the map display:1. Use the ROCKER to highlight the waypoint or map itemon-screen, and press NAV.2. Highlight Go To , then press ENTER.Or1. Highlight the waypoint or map item, press ENTER.2. Highlight Go To from options at the bottom of the window,and press ENTER.