Garmin 190-01098-02 Installation Instructions Manual

Also see for GHS 10: Installation instructions Manual Del Usuario Installation instructions Installation instructions

Contents

VHF 300 Series Installation InstructionsInstalling your VHF 300 Series Radio1. Select locations for the radio components.2. Install the transceiver box (page 3).3. Install the active speaker (page 4).4. Install the GHS 10 (page 5).Although these options are not necessary to use your radio, theseinstructions cover the following additional installation options.Connecting the GHS 10 to a passive speaker (page 5)Connecting the radio to a chartplotter or another GPS device(page 5)Connecting the radio to a hailer horn (page 7).•••Selecting Locations for the VHF 300 Series Radio ComponentsUse the diagram to determine how to best organize the VHF 300 series radio components on your boat. Test to be sure the cables reach allcomponents before permanently mounting any component.VHF 300 Series Layout DiagramVHF 300 transceiver boxNMEA 000 network(optional)NMEA 000 dropcable (optional)VHF 300 power/data cableGHS 10GHS 10 activespeakerNMEA 0183device(optional)1 VdcBulkhead pass-throughplateGHS 10 with a passive speakerAntenna connectorHailer horn(optional)GHS 10cableGHS 10 cableextension(optional)GHS 10Passivespeaker(not included)Clip and tapebare wiresActivespeakercableGHS 10 with an active speakerSwitch10 AfuseGHS 10 station 1This GHS 10 mustbe located in thewheelhouse or anadjacent room perFCC law.Notes:Install the transceiver box in a dry, protected location.•