Garmin 300XL Pilot's Manual And Reference

Garmin 300XL Pilot's Manual And Reference Manual pdf 112 page image

102SECTION7 UNIT SETTINGSMap PageSetupThe map setup page also allows you to control whether or not the various way-point types and the identifiers for these waypoints are displayed. Settings for eachwaypoint type allow you to select the maximum scale at which that feature should bedisplayed, or you may turn that waypoint type off for all scales. For example, by set-ting ‘VOR’ at 80, VOR waypoints will appear on the map display at all scales from 80on down, but not at 120, 200 or 300.To display airports, navaids and/or user waypoints:1. Press and hold M, then rotate O to display the ‘MAP Setup’ page.2. Press C twice and rotate O to highlight ‘apt’, ‘vor’, ‘ndb’, ‘int’ or ‘user’.3. Rotate K to select the maximum map scale for that waypoint type, or select ‘off’ to dis-able the waypoint type entirely.To display waypoint identifiers:1. Press and hold M, then rotate O to display the ‘MAP Setup’ page.2. Press C twice and rotate O to highlight ‘apt ident’, ‘vor ident’, ‘ndb ident’, ‘int ident’,or ‘user ident’.3. Rotate K to select the maximum map scale for that waypoint category, or select ‘off’ todisable the waypoint identifiers.The boundaries for airspaces that appear on the map display may be enabled ordisabled by airspace type. As described above for waypoints, you select the maximumscale at which the airspace should appear or turn the airspace type off entirely.Airspace categories for Class B/CTA, Class C/TMA, MOA, restricted and other SUAs areprovided. ‘Other sua’ includes alert, caution, danger, training and warning areas.A scale setting of ‘200’ for airports will displayairport locations on the map display for all scalesfrom ‘200’ on down. Airports will not appear onthe map display at a scale setting of ‘300’.The automatic zoom feature will automaticallyadjust the map display through progressivelylower scale settings as you approach yourdestination waypoint.