Garmin 3600 Application Manual

Also see for iQUE 3600: Features Operating instructions Setup guide Declaration of conformity Application guide

Contents

iQue™ 3600QueGPS OptionsGPS Applications5To use QueGPS Options:1. Tap the QueGPS application tab or the Menu icon to display theOptions Menu.2. Observe the list of options:• Tap Preferences to display the GPS preference options.• When in 2D mode, tap New Elevation to reset the elevation.• Tap New Location when initializing the GPS Receiver if youhave moved over 600 miles from your last use location or if youhave not powered up the unit in over thirty days.To use QueGPS Preferences:1. Tap the Preferences option to display the GPS Preferences Menu.2. Observe the list of options with check boxes:• Tap WAAS Enabled to enable the Wide Area AugmentationSystem operating mode. (See Additional Information about WAASon page 53.)• Tap Battery Saver to change the rate at which the GPS receiverupdates your position data to conserve battery power. The GPSreceiver slows the frequency at which it calculates your locationand therefore requires less battery power with the result being aslight loss in position accuracy. The GPS is turned completely Offwhen the antenna is fully closed.You cannot operate in the WAAS and Battery Saver modesat the same time. If you attempt to check both boxes, a messagewill display and the last option checked will remain on after youtap the message “OK”Set New ElevationSelect NewLocation forInitializationPreference SettingsQueGPS OptionsQueGPS Preferences Menu