GPSMAP 5000 Series Owner’s ManualUsing ChartsUSinGChartSEnabling High Resolution Satellite ImageryYou can overlay high-resolution satellite images on the land, the sea, or both portions of theNavigation chart when using a preprogrammed BlueChart g2 Vision SD card.To enable satellite imagery:1. While viewing the Navigation Chart, touch Menu > Chart Setup > Appearance > Photos.2. Touch one of the following:Off—standard chart information is shown on the map.Land Only—standard chart information is shown on water with photos overlaying the land.Blend—photos overlay both the water and the land at a specified opacity. The higher you setthe percentage, the more the satellite photos cover both land and water.Note: When enabled, the high resolution satellite images are only present at lower zoom levels. Ifyou cannot see the high resolution images in your BlueChart g2 Vision region, either zoom in further bytouching the and buttons, or set the detail level higher by touching Chart Setup > Appearance> Detail.Blend at 50% Blend at 100%Photo Overlay Off Land Only Photo Overlay•••
