GPSMAP 5000 Series Owner’s ManualGetting StartedGettinGS tarted CAutIoN: Do not try to navigate using simulator mode because the GPS receiver is turned off. Anysatellite signal strength bars shown are only simulations and do not represent the strength of actualsatellite signals.To turn the Simulator Mode on:From the Home screen, touch Configure > System > Simulator > On.Touch Setup to set speed, track control (simulated heading), position, simulator time, andsimulator date.Understanding the Home ScreenUse the Home screen to access all other screens.Note: Options on this screen vary based on the unit type and optional connected network devices.Charts—provides Navigation chart, Mariner’s Eye, Mariner’s Eye 3D, Fish Eye 3D, FishingChart, and Radar Overlay (page 6).Note: Mariner’s Eye 3D, Fish Eye 3D, and Fishing Charts are available only if you use a BlueChartg2 Vision SD card.Sonar—sets up and provides sonar information (only available if the unit is connected to aGarmin sonar module) (page 49).Combinations—sets up the screen to view a chart, sonar, radar, and video in a 2, 3, or 4-fieldsplit screen (page 19).Information—shows information including tides, currents, celestial data, user data, informationabout other boats, gauges, and video (page 29).Mark—marks, edits, or deletes your current location as a waypoint or Man Overboard (page 24).Where to?—provides navigation features (page 21).Radar—sets up and displays radar (only available if the unit is connected to a radar module)(page 44).Weather—sets up and displays various weather parameters, including precipitation, forecast,fishing, sea conditions, and visibility (only available if the unit is connected to a weather moduleand you have an XM subscription) (page 53).Configure—allows you to view and edit your unit and system settings (page 35).Man overboard—navigate to a Man Overboard location (page 24).••••••••••