nüvi 800 Series Owner’s ManualAppendixChanging the FuseCAUTiON: When replacing the fuse,do not lose any of the small piecesand make sure they are put back in theproper place.If your unit will not charge in yourvehicle, you might need to replace thefuse located at the tip of the vehicleadapter.1. Unscrew the black,round end piece, andremove it.2. Remove the fuse(glass and silvercylinder), andreplace it with a 3 Afast-blow fuse.3. Ensure that the silver tip is placed inthe black end piece. Screw on theblack end piece.Removing the nüvi andMountTo remove the nüvi from the cradle,press the button on the bottom of thecradle up, and tilt the nüvi forward.To remove the cradle from the mount,turn the cradle to the right or left. Applypressure in that direction until the cradlesnaps off the mount.To remove the suction cup mount fromthe windshield, flip the lever toward you.Pull the tab on the suction cup towardyou.Mounting on YourDashboardUse the enclosed ounting disk to mountyour unit to the dashboard and complywith certain state regulations.CAUTiON: The permanentmounting adhesive is extremelydifficult to remove after it is installed.EndpieceSilver tipFuseEndpieceSilver tipFuse
