nüvi 800 Series Owner’s Manual Getting Started3. Clean and dry your windshield witha lint-free cloth. Remove the clearplastic from the suction cup, andclean it with a lint-free cloth. Placethe suction cup on the windshield.4. Flip the lever back, toward thewindshield.5. Fit the bottom of your nüvi into thecradle.6. Tilt the nüvi back until it snaps intoplace.7. Plug the other end of the vehiclepower cable into a power outlet inyour vehicle. Your unit should turn onautomatically if it is plugged in andyour vehicle is running.8. If you are using a traffic receiver inEurope, secure the traffic receiverantenna to the windshield using thesuction cups.Step 3: Configure thenüviTo turn on your nüvi, slide the Powerkey to the left. Follow the on-screeninstructions.Step 4: Acquire SatellitesGo outdoors to an open area, out ofgarages, and away from tall buildings.Stop your vehicle, and turn on the nüvi.Acquiring satellite signals can take a fewminutes.The bars indicate GPS satellitestrength. When one bar is green, the nüvihas acquired satellite signals. Now youcan select a destination and navigate toit. For more information about GPS, seepage 59 and visit www.garmin.com/aboutGPS.