Garmin Apollo GX50 GPS Installation Manual

Also see for APOLLO GX60: User guide Quick reference guide

InstallationApollo GX50/60/65 Installation Manual 31APOLLO GX50/60/65 POST-INSTALLATION CHECKOUT LOG Date: ___/___/___By: _____________CONFIGURATION INFORMATION: GX50 GPS 430-6050-4__ Mod ____ Serial # ___________ GX60 GPS/Comm 430-6050-6__ Mod ____ GPS Antenna ___________ GX65 GPS/Comm 430-6050-8__ Mod ____ Comm Antenna: ___________TEST MODE CHECKOUT AND SETUP:Avionics Outputs: Installation Configuration: [ N/A] CDI (left, mid, right) IFR?: Yes No [ N/A] VDI (down, mid, up) APPR? Yes No [ N/A] TO/FROM flag (OFF, TO, FROM) SAR?: Yes No [ N/A] External annunciators Serial Interface Configuration: [ N/A] Valid flags _____________/____________ (Port 1)_____________/____________ (Port 2)GPS NAVIGATION CHECKOUT: Seed position entered Interface Checks: Time, date entered [ N/A] RS-232 outputs checkedGPS Operation: [ N/A] Map/Mapcom Position check [ N/A] GPSS Signal reception check [ N/A] RS-232 inputs checked Interference from other avionics checked [ N/A] Altitude Encoder VHF comm interference check [ N/A] NAV [ N/A] F/ADCVHF COMM CHECKOUT: (GX60/65 ONLY) Receiver / Transmitter operation Sidetone level set / checked Antenna check Flight test operation [ N/A] Remote flip/flop inputFINAL SYSTEM CHECK: Database checked Navigation data checked Direct To waypoint entered DST data acceptable** Note: Distance, Time, and speed information sent through the serial port must be displayed inan acceptable manner. See Limitations in Sec. 4.COMMENTS: