Garmin DEZL LGV500 Owner's Manual

Starting the Break TimerThe break timer starts automatically when the vehicle is moving at least 8 kph (5 mph) for 30 seconds. You canstart the timer manually at any time.1 From the map, select > Break Planner.2 Select Start Timer.Pausing and Resetting the Break TimerThe break timer pauses automatically when the vehicle stops for three minutes or longer. You can pause thetimer manually for brief stops, such as parking or stopping at a truck stop. At the end of your drive, you canmanually reset the timer.1 Select Stop Timer.2 Select an option:• To pause the timer, select Pause.• To stop and reset the timer, select Reset.Adjusting Drive HoursYou can adjust your total hours driven to more closely match your hours of service records.1 While using the break planner feature, select Total Hours Driven.2 Enter the total hours driven.3 Select Save.Adjusting the Daily Driving LimitYou can adjust the daily driving limit to correspond with legal requirements in your area.NOTE: This feature is not available in all areas.1 While using the break planner feature, select Daily Hours Driven.2 Select the daily driving limit for your area.3 Select Save.Garmin eLogThe Garmin eLog adapter enables a motor carrier to comply with hours of service logging and breakrequirements. When a Garmin eLog adapter is paired with your compatible mobile device, you can view hoursof service information on your dēzl device. The Garmin eLog adapter is not available in all areas. For moreinformation, or to purchase a Garmin eLog adapter, go to garmin.com/elog.NOTE: Garmin eLog features are not available when using the car vehicle profile.Setting Up Garmin eLog Features On Your dēzl Device1 Pair your Garmin eLog adapter with the Garmin eLog app on your mobile device (Setting Up Your GarmineLog Device, page 35).2 Pair your dēzl device with your compatible mobile device (Live Services, Traffic, and Smartphone Features,page 28).3 Enable the Garmin eLog app to pair with a dēzl device (Enabling the Garmin eLog App to Pair with a dēzlDevice, page 36).4 If necessary, enable the Garmin eLog connection on your dēzl device (Enabling or Disabling the Garmin eLogConnection on Your dēzl Device, page 36).Setting Up Your Garmin eLog DeviceYou must set up and pair your Garmin eLog adapter with the Garmin eLog app in order to use the device.1 From the app store on your mobile device, install and open the Garmin eLog app.2 On your mobile device, follow the on-screen instructions to set up and configure the Garmin eLog system.NOTE: Until you complete the setup process, the device has limited functionality.Vehicle and Driver Tools 35