Garmin DEZL LGV500 Owner's Manual

Turning the Device On or Off• To turn the device on, press the power key , or connect the device to power.• To put the device in power saving mode, press the power key while the device is on.While in power saving mode, the screen is off and the device uses very little power, but it can wake instantlyfor use.TIP: You can charge your device faster by putting it in power saving mode while charging the battery.• To turn off the device completely, hold the power key until a prompt appears on the screen, and select Off.The prompt appears after five seconds. If you release the power key before the prompt appears, the deviceenters power saving mode.Acquiring GPS SignalsWhen you turn on your navigation device, the GPS receiver must collect satellite data and establish the currentlocation. The time required to acquire satellite signals varies based on several factors, including how far you arefrom the location where you last used your navigation device, whether you have a clear view of the sky, and howlong it has been since you last used your navigation device. The first time you turn on your navigation device, itmay take several minutes to acquire satellite signals.1 Turn on the device.2 Wait while the device locates satellites.3 If necessary, go to an open area, away from tall buildings and trees.in the status bar indicates the satellite signal strength. When at least half the bars are filled, the device isready for navigation.Getting Started 3