Garmin Drivesmart 55 Owner's Manual

Also see for Drivesmart 55: Owner's manual Declaration of conformity Owner's manual Owner's manual

Garmin Drivesmart 55 Owner's Manual Manual pdf 14 page image

Customising the up ahead categoriesYou can change the location categories that appear in the UpAhead tool.1 From the map, select > Up Ahead.2 Select a category.3 Select .4 Select an option:• To move a category up or down in the list, select and dragthe arrow next to the category name.• To change a category, select the category.• To create a custom category, select a category, selectCustom Search, and enter the name of a business orcategory.5 Select Save.Towns AheadWhile you are travelling on a highway or navigating a route thatincludes a highway, the Towns Ahead tool provides informationabout upcoming towns along the highway. For each town, themap tool shows the distance to the highway exit and theservices available, similar to the information on highway roadsigns.Viewing Upcoming Towns and Exit Services1 From the map, select .While you are travelling along a highway or an active route,the map tool shows information about upcoming towns andexits.2 Select a town.The device shows a list of points of interest located at theselected town exit, such as fuel stations, lodging orrestaurants.3 Select a location, and select Go! to start navigating.Trip informationViewing trip data from the mapBefore you can view trip data on the map, you must add the toolto the map tools menu.From the map, select > Trip Data.Viewing Customised Trip Information on the MapYou can use the trip data map tool to show customised tripinformation on the map.1 From the map, select > Trip Data.2 Select an option:• Select a data field in the trip data tool and select theinformation to show in the field.• Select the customisable map data field , and select theinformation to show in the field.Viewing the trip information pageThe trip information page displays your speed and providesstatistics about your trip.NOTE: if you make frequent stops, leave the device turned on,so it can accurately measure elapsed time during the trip.From the map, select Speed.Viewing the trip logYour device keeps a trip log, which is a record of the path youhave travelled.1 Select Settings > Map & Vehicle > Map Layers.2 Select the Trip Log tick box.Resetting trip information1 From the map, select Speed.2 Select > Reset Field(s).3 Select an option:• When not navigating a route, select Select All to resetevery data field on the first page except the speedometer.• Select Reset Trip Data to reset the information on the tripcomputer.• Select Reset Max. Speed to reset the maximum speed.• Select Reset Trip B to reset the odometer.Viewing upcoming trafficBefore you can use this feature, your device must be receivingtraffic data (Traffic, page 13).You can view traffic incidents coming up along your route oralong the road on which you are travelling.1 While navigating a route, select > Traffic.The nearest upcoming traffic incident appears in a panel onthe right side of the map.2 Select the traffic incident to view additional details.Viewing traffic on the mapThe traffic map shows colour-coded traffic flow and delays onnearby roads.1 From the main menu, select Apps > Traffic.2 If necessary, select > Legend to view the legend for thetraffic map.Searching for traffic incidents1 From the main menu, select Apps > Traffic.2 Select > Incidents.3 Select an item in the list.4 If there is more than one incident, use the arrows to viewadditional incidents.Customising the mapCustomising the map layersYou can customise which data appears on the map, such asicons for points of interest and road conditions.1 Select Settings > Map & Vehicle > Map Layers.2 Select the tick box next to each layer you want to show onthe map.Changing the map data field1 From the map, select a data field.NOTE: you cannot customise Speed.2 Select a type of data to display.Changing the map perspective1 Select Settings > Map & Vehicle > Driving Map View.10 Using the Map