AppendixInstalling a memory card for maps and dataYou can install a memory card to increase the storage space formaps and other data on your device. You can purchase memorycards from an electronics supplier, or go to www.garmin.com/maps to purchase a memory card with pre-loaded Garminmapping software. The device supports microSD memory cardsfrom 4 to 32 GB.1 Locate the map and data memory card slot on your device(Garmin DriveSmart 55/65 device overview, page 1).2 Insert a memory card into the slot.3 Press it in until it clicks.Data managementYou can store files on your device. The device has a memorycard slot for additional data storage.NOTE: the device is not compatible with Windows 95, 98, Me,Windows NT®and Mac OS 10.3 or earlier.About Memory CardsYou can purchase memory cards from an electronics supplier,or purchase pre-loaded Garmin mapping software(www.garmin.com). In addition to map and data storage, thememory card can be used to store files such as maps, images,geocaches, routes, waypoints, and custom POIs.Connecting the Device to Your ComputerYou can connect the device to your computer using a USBcable.1 Plug the small end of the USB cable into the port on thedevice.2 Plug the larger end of the USB cable into a port on yourcomputer.3 When your Garmin DriveSmart device prompts you to enterfile transfer mode, select Yes.A picture of your device connected to a computer appears onthe device screen.Depending on your computer operating system, the deviceappears as either a portable device, a removable drive, or aremovable volume.Transferring data from your computer1 Connect the device to your computer (Connecting the Deviceto Your Computer, page 21).Depending on your computer operating system, the deviceappears as either a portable device, a removable drive or aremovable volume.2 On your computer, open the file browser.3 Select a file.4 Select Edit > Copy.5 Browse to a folder on the device.NOTE: for a removable drive or volume, you should not placefiles in the Garmin folder.6 Select Edit > Paste.Disconnecting the USB cableIf your device is connected to your computer as a removabledrive or volume, you must safely disconnect your device fromyour computer to avoid data loss. If your device is connected toyour Windows computer as a portable device, it is not necessaryto safely disconnect the device.1 Complete an action:• For Windows computers, select the Safely RemoveHardware icon in the system tray and select your device.• For Apple®computers, select the device, and select File >Eject.2 Disconnect the cable from your computer.Viewing GPS signal statusHold for three seconds.Purchasing additional maps1 Go to your device product page at garmin.com.2 Click the Maps tab.3 Follow the on-screen instructions.Purchasing accessoriesGo to garmin.com/accessories.Appendix 21