Garmin ECHOMAP PLUS 40 Series Owner's Manual

Also see for Echomap Plus 40 series: Installation instruction Installation instructions Owner's manual

Contents

1 From the media screen, select MENU > Tuning Mode.2 Select an option.3 If necessary, select SELECT.PresetsYou can save your favorite AM stations and FM stations aspresets for easy access.You can save your favorite DAB stations if you are connected toan optional DAB antenna.Saving a Station as a Preset1 From an applicable media screen, tune to the station to saveas a preset.2 Select Presets > Add Current Channel.Removing a Preset1 From an applicable media screen, select Presets.2 Select a preset from the list.3 Select Remove Current Channel.DAB PlaybackWhen you connect a compatible Digital Audio Broadcasting(DAB) module and antenna, such as the FUSION®MS-DAB100A to a compatible stereo, you can tune in to and playDAB stationsTo use the DAB source, you must be in a region in which DAB isavailable, and select the tuner region (Setting the DAB TunerRegion, page 33).Setting the DAB Tuner RegionYou must select the region you are in to receive DAB stationsproperly.1 From the media screen, select MENU > Installation > TunerRegion.2 Select the region you are in.Scanning for DAB StationsBefore you can scan for DAB stations, you must connect acompatible DAB module and antenna (not included) to thestereo. Because DAB signals are broadcast in select countriesonly, you must also set the tuner region to a location where DABsignals are broadcast.1 Select the DAB source.2 Select Scan to scan for available DAB stations.When scanning is complete, the first available station in thefirst ensemble found begins playing.NOTE: After the first scan is complete, you can select Scanagain to re-scan for DAB stations. When the re-scan iscomplete, the system starts playing the first station in theensemble you were listening to when you started the re-scan.Changing DAB Stations1 Select the DAB source.2 If necessary, select Scan to scan for local DAB stations.3 Select or to change the station.When you reach the end of the current ensemble, the stereoautomatically changes to the first available station in the nextensemble.Selecting a DAB Station from a List1 From the DAB media screen, select Browse > Stations.2 Select a station from the list.Selecting a DAB Station from a Category1 From the DAB media screen, select Browse > Categories.2 Select a category from the list.3 Select a station from the list.DAB PresetsYou can save your favorite DAB stations as presets for easyaccess.You can save up to 15 DAB-station presets.Saving a DAB Station as a Preset1 From the DAB media screen, select the station to save as apreset.2 Select Browse > Presets > Save Current.Selecting a DAB Preset from a List1 From the DAB media screen, select Browse > Presets >View Presets.2 Select a preset from the list.Removing DAB Presets1 From the DAB media screen, select Browse > Presets.2 Select an option:• To remove one preset, select Remove Preset, and selectthe preset.• To remove all presets, select Remove All Presets.SiriusXM®Satellite RadioWhen you have a FUSION-Link™ capable stereo and SiriusXMConnect Tuner installed and connected to the chartplotter, youmay have access to SiriusXM satellite radio, depending on yoursubscription.Locating a SiriusXM Radio IDBefore you can activate your SiriusXM subscription, you musthave the radio ID of your SiriusXM Connect Tuner.You can locate the SiriusXM Radio ID on the back of theSiriusXM Connect Tuner, on the back of its packaging, or bytuning your chartplotter to channel 0.1 Select Media > Source > SiriusXM.2 Tune to channel 0.The SiriusXM radio ID does not include the letters I, O, S, orF.Activating a SiriusXM Subscription1 With the SiriusXM source selected, tune to channel 1.You should be able to hear the preview channel. If not, checkthe SiriusXM Connect Tuner and antenna installation andconnections, and try again.2 Tune to channel 0 to locate the Radio ID.3 Contact SiriusXM listener care by phone at (866) 635-2349 orgo to www.siriusxm.com/activatenow to subscribe in theUnited States. Contact SiriusXM by phone at (877) 438-9677or go to www.siriusxm.ca/activatexm to subscribe in Canada.4 Provide the Radio ID.The activation process usually takes 10 to 15 minutes, butcan take up to an hour. For the SiriusXM Connect Tuner toreceive the activation message, it must be turned on andreceiving the SiriusXM signal.5 If the service is not activated within the hour, go tohttp://care.siriusxm.com/refresh or contact SiriusXM ListenerCare by phone at 1-866-635-2349.Customizing the Channel GuideSiriusXM radio channels are grouped in categories. You canselect the categories of channels that appear in the channelguide.Select an option:• If the media device is a FUSION-Link capable stereo,select Media > Browse > Channel.• If the media device is a GXM™ antenna, select Media >MENU > Category.Media Player 33