Garmin ECHOMAP PLUS 40 Series Owner's Manual

Also see for Echomap Plus 40 series: Installation instruction Installation instructions Owner's manual

Contents

Saving a SiriusXM Channel to the Presets ListYou can save your favorite channels to the presets list.1 Select Media.2 Select the channel to save as a preset.3 Select an option:• If the media device is a FUSION-Link capable stereo,select Browse > Presets.• If the media device is a GXM antenna, select MENU >Presets > Add Current Channel.Unlocking SiriusXM Parental Controls1 From the media screen, select Browse > Parental > Unlock.2 Enter your passcode.The default passcode is 0000.Setting Parental Controls on SiriusXM Radio ChannelsBefore you can set parental controls, the parental controls mustbe unlocked.The parental control feature allows you to limit access to anySiriusXM channels, including those with mature content. Whenenabled, the parental control feature requires you to enter apasscode to tune to the locked channels.Select Browse > Parental > Lock/Unlock.A list of channels appears. A checkmark indicates a lockedchannel.NOTE: When you view the channels after setting parentalcontrols, the display changes:• indicates a locked channel.• indicates an unlocked channel.Changing a Parental Passcode on a SiriusXM RadioBefore you can change the passcode, the parental controls mustbe unlocked.1 From the media screen, select Browse > Parental > ChangePIN.2 Enter your passcode and select Done.3 Enter a new passcode.4 Confirm the new passcode.Restoring Default Parental Control Settings ValuesThis process deletes all the settings information you haveentered. When you restore the parental control settings to theirdefault values, the passcode value is reset to 0000.1 From the media menu, select Installation > FactoryDefaults.2 Select Yes.Clearing All Locked Channels on a SiriusXM RadioBefore you can clear all locked channels, the parental controlsmust be unlocked.1 From the media screen, select Browse > Parental > ClearAll Locked.2 Enter your passcode.Setting the Device Name1 From the media screen, select MENU > Installation > SetDevice Name.2 Enter a device name.3 Select SELECT or Done.Updating the Media Player SoftwareYou can update the software on compatible connected stereosand accessories.1 Go to www.fusionentertainment.com/marine, and downloadthe software update onto a USB flash drive.Software updates and instructions are available on yourdevice product page.2 Insert the USB flash drive into the USB port of the stereo.3 On the chartplotter media screen, select MENU >Installation > Update Software.4 Select the item to update.Device ConfigurationTurning On the Chartplotter AutomaticallyYou can set the chartplotter to turn on automatically when thepower is applied. Otherwise, you must turn on the chartplotter bypressing .Select Settings > System > Auto Power.NOTE: When Auto Power is On, and the chartplotter isturned off using , and power is removed and reappliedwithin less than two minutes, you may need to press torestart the chartplotter.System SettingsSelect Settings > System.Display: Adjusts the backlight brightness and color scheme.Beeper: Turns on and off the tone that sounds for alarms andselections.GPS: Provides information about the GPS satellite settings andfix.Auto Power: Turns on the device automatically when power isapplied (Turning On the Chartplotter Automatically,page 34 ).Language: Sets the on-screen text language.Speed Sources: Sets the source of the speed data used tocalculate true wind speed or fuel economy. Water speed isthe speed reading from a water-speed sensor, and GPSspeed is calculated from your GPS position.System Information: Provides information about the device andthe software version.Simulator: Turns on the simulator and allows you to set thespeed and simulated location.Display SettingsNot all options are available on all models.Select Settings > System > Display.Backlight: Sets the backlight level.Color Mode: Sets the device to display day or night colors.Screenshot Capture: Allows the device to save images of thescreen.Background: Sets the device to display a background image orcolor.GPS SettingsSelect Settings > System > GPS.Skyview: Shows the relative position of GPS satellites in thesky.GLONASS: Turns on or off GLONASS data (Russia satellitesystem). When the system is used in situations with poor skyvisibility, GLONASS data can be used in combination withGPS to provide more accurate position information.WAAS/EGNOS: Turns on or off WAAS data (in North America)or EGNOS data (in Europe), which can provide more-accurate GPS position information. When using WAAS orEGNOS data, the device may take longer to acquiresatellites.Galileo: Turns on or off Galileo data (European Union satellitesystem). When the system is used in situations with poor sky34 Device Configuration