Garmin Edge 1000 Owner's Manual

Also see for Edge 1000: Quick start manual Quick start manual Quick guide Owner's manual

Contents

Garmin Edge 1000 Owner's Manual Manual pdf 14 page image

1 From the home screen, select the status bar or swipe downfrom the top of the page.The connections page appears.2 Select GPS > Mark Location > .Saving Locations from the Map1 From the home screen, select Where To? > > A MapPoint.2 Browse the map for the location.3 Select the location.Location information appears at the top of the map.4 Select the location information.5 Select > .Navigating to a Location1 From the home screen, select Where To?.2 Select an option:• Select Saved to navigate to a saved course, location, orsegment.• Select Recent Finds to navigate to one of the last 50locations you have found.• Select Search Tools to navigate to a point of interest orspecific address (requires routable maps), or a city,intersection, or known coordinates.• Select to narrow your search area.3 If necessary, select to enter specific search information.4 Select a location.5 Select RIDE.6 Follow the on-screen instructions to your destination.Navigating to Known Coordinates1 From the home screen, select Where To? > Search Tools >Coordinates.2 Enter the coordinates, and select .3 Follow the on-screen instructions to your destination.Navigating Back to StartAt any point during your ride, you can return to the startingpoint.1 Go for a ride (Going for a Ride).2 During your ride, select anywhere on the screen to view thetimer overlay.3 Select > Where To? > Back to Start.4 Select Along Same Route or Most Direct Route.5 Select RIDE.The device navigates you back to the starting point of yourride.Stopping Navigation1 Select anywhere on the screen to view the timer overlay.2 Scroll to the map.3 Select > .Projecting a LocationYou can create a new location by projecting the distance andbearing from a marked location to a new location.1 From the home screen, select Where To? > Saved >Locations.2 Select a location.3 Select the location information at the top of the screen.4 Select > Project Location.5 Enter the bearing and distance to the projected location.6 Select .Editing Locations1 From the home screen, select Where To? > Saved >Locations.2 Select a location.3 Select the information bar at the top of the screen.4 Select .5 Select an attribute.For example, select Change Elevation to enter a knownaltitude for the location.6 Enter the new information, and select .Deleting a Location1 From the home screen, select Where To? > Saved >Locations.2 Select a location.3 Select the location information at the top of the screen.4 Select > Delete Location > .Planning and Riding a RouteYou can create and ride a custom route. A route is a sequenceof waypoints or locations that leads you to your final destination.1 From the home screen, select Where To? > Route Planner> Add First Location.2 Select an option:• To select a saved location, select Saved, and select alocation.• To select a location for which you recently searched,select Recent Finds, and select a location.• To select a location on the map, select Use Map, andselect a location.• To browse for and select a point of interest, select POICategories, and select a nearby point of interest.• To select a city, select Cities, and select a nearby city.• To select an address, select Address, and enter theaddress.• To use coordinates, select Coordinates, and enter thecoordinates.3 Select Use.4 Select Add Next Location.5 Repeat steps 2–4 until you have selected all locations for theroute.6 Select View Route.The device calculates your route, and a map of the routeappears.TIP: You can select to view an elevation plot of the route.7 Select RIDE.10 Navigation