Garmin Edge 1000 Owner's Manual

Also see for Edge 1000: Quick start manual Quick start manual Quick guide Owner's manual

Contents

Garmin Edge 1000 Owner's Manual Manual pdf 15 page image

Creating a Round-Trip RouteThe device can create a round-trip route based on a specifieddistance and a starting location.1 From the home screen, select Where To? > Round-TripRouting.2 Select Distance, and enter the total distance for the route.3 Select Start Location.4 Select an option:• Select Current Location.NOTE: If the device cannot acquire satellite signals todetermine your current location, the device prompts youto use the last known location or to select the location onthe map.• Select Use Map to select a location on the map.5 Select Search.TIP: You can select to search again.6 Select a route to view it on the map.TIP: You can select and to view the other routes.7 Select RIDE.Route SettingsSelect > Activity Profiles, select a profile, and selectNavigation > Routing.Routing Mode: Allows you to select an activity for the device tocalculate your route (Selecting an Activity for RouteCalculation).Calculation Method: Allows you to select the calculationmethod to optimize your route.Lock On Road (requires routable maps): Locks the positionicon, which represents your position on the map, onto thenearest road.Avoidance Setup (requires routable maps): Allows you toselect the road type you want to avoid.Recalculation (requires routable maps): Allows you to selectthe recalculation method when you deviate from the route.Selecting an Activity for Route CalculationYou can set the device to calculate the route based on activitytype.1 From the home screen, select > Activity Profiles.2 Select a profile.3 Select Navigation > Routing > Routing Mode.4 Select an option to calculate your route.For example, you can select Tour Cycling for on-roadnavigation or Mountain Biking for off-road navigation.Map SettingsSelect > Activity Profiles, select a profile, and selectNavigation > Map.Orientation: Sets how the map is shown on the page.Auto Zoom: Automatically selects a zoom level for the map.When Off is selected, you must zoom in or out manually.Guide Text: Sets when the turn-by-turn navigation prompts areshown (requires routable maps).Map Visibility: Allows you to set advanced map features.Map Information: Enables or disables the maps currentlyloaded on the device.Changing the Map Orientation1 Select > Activity Profiles.2 Select a profile.3 Select Navigation > Map > Orientation.4 Select an option:• Select North Up to show north at the top of the page.• Select Track Up to show your current direction of travel atthe top of the page.• Select 3D Mode to display the map in three dimensions.Advanced Map SettingsSelect > Activity Profiles, select a profile, and selectNavigation > Map > Map Visibility.Map Visibility Mode: Auto and High Contrast have presetvalues. You can choose Custom to set each value.Zoom Levels: Sets map items to draw or appear at or belowthe selected zoom level.Text Size: Sets the text size for map items.Detail: Sets the amount of detail shown on the map. Showingmore detail may cause the map to redraw more slowly.Shaded Relief: Shows detail relief on the map (if available) orturns off shading.Purchasing Additional MapsBefore purchasing additional maps, you should determine theversion of the maps that are loaded on your device.1 From the home screen, select > Activity Profiles.2 Select a profile.3 Select Navigation > Map > Map Information.4 Select a map.5 Select .6 Go to http://buy.garmin.com, or contact your Garmin dealer.Finding an AddressYou can use the preloaded Garmin Cycle Map (if available) oroptional City Navigator® maps to search for addresses, cities,and other locations. The detailed and routable maps containmillions of points of interest, such as restaurants, hotels, andauto services.1 From the home screen, select Where To? > Search Tools >Addresses.2 Follow the on-screen instructions.TIP: If you are unsure of the city, select Search All.3 Select the address, and select RIDE.Finding a Point of Interest1 From the home screen, select Where To? > Search Tools >POI Categories.2 Select a category.TIP: If you know the name of the business, select All POIs >to enter the name.3 If necessary, select a subcategory.4 Select the location, and select RIDE.Finding Nearby Locations1 From the home screen, select Where To? > .2 Select an option.For example, select A Recent Find to search for arestaurant near the address you recently searched for.3 If necessary, select a category and subcategory.4 Select the location, and select RIDE.Topographical MapsYour device may include topographical maps or you canpurchase them from http://buy.garmin.com. Garminrecommends that you download BaseCamp™ to plan yourroutes and activities using topographical maps.Navigation 11