Garmin Edge 800 Owner's Manual

Also see for Edge 800: Important safety instructions Quick start manual Declaration of conformity Owner's manual

Contents

Garmin Edge 800 Owner's Manual Manual pdf 20 page image

16 Edge 800 Owner’s ManualANT+ SensorsAbout the gSC 10Cadence data from the GSC 10 isalways recorded. If there is no GSC 10paired, GPS data is used to calculatethe speed and distance.Cadence is your rate of pedaling or“spinning” measured by the number ofrevolutions of the crank arm per minute(rpm). There are two sensors on theGSC 10: one for cadence and one forspeed.For information about cadence alerts,see page 5.Non-Zero Averaging forCadence DataThe non-zero data-averaging settingis available if you are training with anoptional cadence sensor. The defaultsetting is to exclude zero values thatoccur when you are not pedaling.To turn the non-zero averaging onor off, select MENU > > BikeSettings > Data Recording > DataAveraging > Cadence.Third-Party ANT+ SensorsFor a list of third-party ANT+ sensorsthat are compatible with the Edge, goto www.garmin.com/intosports.Pairing Your Power MeterRefer to the manufacturer’sinstructions.When the power meter is paired, amessage appears, and appearssolid on the status page.Calibrating Your Power MeterFor calibration instructions specificto your power meter, refer to themanufacturer’s instructions.Before you can calibrate your powermeter, it must be properly installed andactively recording data.